What is ATAR?
ATAR is a percentile rank that compares a student with other students in their age cohort. It is reported from 30.00 to 99.95, in steps of 0.05, and it tells you where you sit in relation to everyone else — not how many questions you answered correctly. An ATAR of 80.00, for example, means you performed better than 80 per cent of your age group. That is the whole idea in one sentence: ATAR ranks you against your peers.
The full name is the Australian Tertiary Admission Rank, and it exists for one main purpose — to give universities a single, comparable figure they can use when deciding who gets a place in a course. Because each Australian state runs its own school system, with different subjects, exams and marking, a raw mark from one state cannot be compared directly with a raw mark from another. ATAR solves that problem by converting every student’s results into the same national ranking scale.
That is why the same number means the same thing whether you finished school in Melbourne, Sydney, Brisbane, Perth or Adelaide. A student in Victoria and a student in Queensland with the same ATAR have achieved the same position relative to their peers, even though they sat completely different exams. This comparability is the reason universities across the country can use ATAR as a common entry measure. Canberra is the sixth case — the ACT has its own BSSS system, and our ACT ATAR calculator estimates a rank from BSSS course scores.
Why there is no ATAR of 100
ATAR is a rank, so the top of the scale is set by the size of the steps, not by a perfect mark. The scale moves in steps of 0.05, and the highest rank anyone can hold is 99.95 — the top 0.05 per cent of the age cohort. Nobody can rank above the top 0.05 per cent, because there is no smaller slice of the cohort to be better than. That is also why 99.95 is not a “perfect score”: it says you sit at the very top of the ranking, not that you answered everything correctly.
Who are you compared with?
Your ATAR compares you with your whole age group — everyone who would have finished Year 12 in your state that year — not just the students who received an ATAR. That distinction matters, because not every student in the age cohort receives one: some leave school early, some take a vocational pathway, and some do not complete the required subjects, yet they still count in the ranking. By construction, 50.00 is the middle of the whole age cohort, but the students who actually receive an ATAR are a selected group, so the typical result among them sits above 50.00. There is no single officially published “average ATAR” — the admissions centres publish distributions, not one average figure — and we explain why in our guide to the average ATAR in Australia.
Is ATAR a rank or a score out of 100?
The most common misunderstanding about ATAR is treating it like a percentage. It is not. An ATAR of 90.00 does not mean you scored 90 per cent on your exams, and an ATAR of 50.00 does not mean you got half your answers right. The number describes your position in a ranking, and positions work differently from marks.
Think of it like a running race. If you finish in the top ten per cent of runners, that tells us how you did compared with everyone else in the race — it says nothing about how fast you ran in absolute terms. ATAR works the same way. It measures your results against the results of the whole age group, so the same set of marks could produce a slightly different ATAR in a different year if the cohort performed differently. Universities sometimes compare ranks with grade averages instead — see ATAR vs GPA for how the two scales relate.
How is an ATAR calculated?
Your ATAR is built from your scaled subject results. First, each of your subjects is scaled, which adjusts the result for the strength of the students who took that subject, so that a strong result in one subject can be fairly compared with a strong result in another. Scaling is recalculated every year from that year’s cohort, so the same raw result can scale differently in different years.
Next, your best scaled results are combined into an aggregate — a single total that summarises your overall performance. Exactly how many subjects count, and how the total is combined, depends on your state. Each state has its own rules for which subjects count and how they are weighted, and those rules are published by the state’s tertiary admissions centre.
Finally, that aggregate is turned into a percentile rank. Everyone’s aggregate is placed in order, and your position in that ordering becomes your ATAR. This last step is what makes ATAR a rank rather than a mark: the number reflects where your aggregate sits among all the aggregates, not the size of the aggregate itself. Our guide to how ATAR is calculated walks through each step in detail, state by state.
What is scaling?
Scaling is the statistical adjustment that makes different subjects comparable. It does not judge whether a subject is hard or easy: it looks at how the students who took that subject performed in all their other subjects. If that group did very well overall, results in the subject are scaled up; if the group did less well, results are scaled down. That way, a strong result in one subject counts about the same as a strong result in another, and students are neither advantaged nor disadvantaged by the subjects they chose. Our guide to how ATAR scaling works explains the idea, and subject scaling shows which subjects scaled up and down in 2025.
What counts in each state?
Every state follows the same three steps — scale, aggregate, rank — but what goes into the aggregate differs. Tasmania is the exception to the usual pattern: it has no separate admissions centre, so the University of Tasmania issues the ATAR from course scores scaled by TASC.
| State / territory | Certificate | Who calculates it | What counts towards the aggregate |
|---|---|---|---|
| Victoria | VCE | VTAC | Best English-group score + next 3 best, plus 10% of the 5th and 6th scores |
| New South Wales | HSC | UAC | Best 2 units of English + best 8 other units (10 units in total) |
| Queensland | QCE | QTAC | Best 5 subjects (General, Applied, or Certificate III or higher VET) |
| Western Australia | WACE | TISC | Best 4 scaled scores, plus 10% of a LOTE, Maths Methods or Maths Specialist score |
| South Australia & NT | SACE / NTCET | SATAC | Best 90 credits of scaled Stage 2 results |
| Australian Capital Territory | ACT Senior Secondary Certificate | BSSS, in consultation with UAC | Best 3 major course scores + 0.6 of the next best course score |
| Tasmania | TCE | University of Tasmania (TASC scales the courses) | Best 5 Level 3 or 4 courses over two years — a TE Score of 60 to 75 points |
We have an estimator for six of the seven systems: the VCE ATAR calculator, HSC ATAR calculator, QCE ATAR calculator, WACE ATAR calculator, SACE ATAR calculator and ACT ATAR calculator. Every one of them is an estimate only — your official ATAR comes from your state’s admissions centre, using that year’s actual scaling and cohort.
Who calculates your ATAR?
There is no single national body that issues ATARs. Each state and territory has its own tertiary admissions centre, and that centre calculates the ATAR for students in its state. In Victoria it is VTAC, the Victorian Tertiary Admissions Centre. In New South Wales and the Australian Capital Territory it is UAC, the Universities Admissions Centre. In Queensland it is QTAC, the Queensland Tertiary Admissions Centre. In Western Australia it is TISC, the Tertiary Institutions Service Centre. In South Australia and the Northern Territory it is SATAC, the South Australian Tertiary Admissions Centre.
These centres work with the school curriculum authority in each state — the body that runs the exams and issues study scores or marks — to produce the ATAR. Your school results go to the admissions centre, the centre applies scaling and the state’s aggregation rules, and the centre releases your ATAR. Because the centres all use the same national ranking scale, the ATAR you receive is comparable across the country even though it was calculated by a state body.
Who gets an ATAR?
Not every student who finishes Year 12 receives an ATAR. You generally need to complete an eligible combination of subjects and meet your state’s requirements — for example, completing a minimum number of subjects, including English, and meeting any rules about which subjects can count. Students who do not meet those requirements still receive their school results and can still apply for many courses through other pathways, but they will not have an ATAR to report.
This is an important point that is often missed. ATAR is calculated for the students who are eligible for it, and the ranking compares you with the whole age cohort — not just the students who received an ATAR. That is one reason why the middle of the ATAR scale does not line up with the average result of the students who received one, a point we explain in our guide to the average ATAR in Australia.
One group of students follows a different route entirely: those who complete the International Baccalaureate do not receive an ATAR at all, because the IB result is converted into an equivalent rank instead. Our guide on how IB scores convert to ATAR explains the official conversion table.
Who does not get an ATAR?
International students on a student visa do not receive an ATAR — they apply to universities directly, and each university assesses them on its own criteria. Students who take only vocational (VET) subjects without enough ATAR-eligible academic subjects, students who drop below the minimum subject count before the end of Year 12, and students who leave school before completing Year 12 also do not receive one. None of that locks anyone out of university: the pathways below exist precisely for students in these situations.
What is an ATAR used for?
The main use of ATAR is university admission. Each university course sets a selection rank — often called a cut-off — which is the lowest ATAR that gained entry in a previous year. When you apply, your ATAR is compared with the cut-off for each course on your preference list. If your ATAR is at or above the cut-off, you are in the running for a place; if it is below, you may still be considered through adjustment factors, alternative pathways, or later offer rounds, depending on the course and the university.
Cut-offs are not fixed entry requirements set in advance. They are the result of supply and demand in a previous year: how many places were available and how many people applied. A course with a high cut-off last year may have a lower one this year, and the reverse is also true. For the current cut-off for any course, check the course search on the website of the relevant admissions centre — VTAC, UAC, QTAC, TISC or SATAC — or the university itself.
One more distinction matters before you compare your result with a cut-off: the number universities actually use is your selection rank — your ATAR plus adjustment factors — not your raw ATAR. Our guide to ATAR vs selection rank explains the difference, and which number to compare against the figure a university publishes.
It is also worth asking how long the number keeps mattering. Once you are past Year 12, the ATAR fades quickly — employers and universities soon care far more about what you do next. Our guide on whether ATAR matters after Year 12 looks at when it counts and when it stops counting.
Your ATAR is not the number universities use
Universities select on your selection rank, which is your ATAR plus any adjustment factors you qualify for — subject performance, location, equity schemes such as SEAS, or elite athlete and performer schemes. Adjustment factors lift your selection rank for a particular course; they never change your ATAR itself, and they can differ from one course to the next, so your selection rank can differ too. That is why a course’s published cut-off is a lowest selection rank, not a lowest ATAR, and why comparing your raw ATAR with a cut-off can mislead you by a few points in either direction.
What is a good ATAR?
There is no single number that counts as good. A good ATAR is the one that gets you into the course you want at the institution you want — which might be in the 60s for one course and above 99 for another. The useful question is not “what is a good ATAR?” but “what does my target course require?”, and our guide to what a good ATAR is explains how to answer it from the published cut-offs for the courses on your list.
When do ATARs come out?
ATARs are released in December, but the date — and the time — differs by state, and the dates change every year, so check your own admissions centre before the day. For 2026, VCE results and ATARs are available from 7am on Thursday 10 December through VTAC. In New South Wales, HSC results are released on Wednesday 16 December, and UAC releases ATARs at 9am the same day. In Queensland, QTAC releases ATARs on Friday 18 December. For South Australia, Western Australia and Tasmania, check the key dates pages of SATAC, TISC and the University of Tasmania — no single national release date exists. Once your ATAR arrives, the next step is usually to re-order your course preferences before the change-of-preference deadline for the offer round you want; our guide to university offer rounds explains how the rounds work.
A brief history of the ATAR
Before the ATAR, every state had its own university entrance ranking with its own name, which made interstate comparisons confusing for students, universities and employers. In June 2009 the federal education minister announced a single national rank to replace them. New South Wales and the ACT were first, with the 2009 cohort; Victoria, South Australia, the Northern Territory, Western Australia and Tasmania followed with the 2010 cohort. Queensland was last: it kept its Overall Position (OP), a 1-to-25 scale, until the 2020 cohort, when it switched to the ATAR. The old names still surface in conversation — UAI in New South Wales and the ACT, ENTER in Victoria, TER in South Australia, the Northern Territory, Western Australia and Tasmania, and OP in Queensland — but they all describe the same idea under an earlier name.
What if you do not get an ATAR?
Not getting an ATAR is not the end of a university plan. Many students enter through a TAFE certificate or a diploma that feeds into the second year of a degree, through early entry schemes that judge you on your Year 11 results or a recommendation, or as mature-age students on the basis of work experience, prior study or a test such as the STAT. Some courses do not use the ATAR at all and select on a portfolio, audition, interview or test instead. Our guides to early entry, mature-age entry and options with a low ATAR set out the routes in detail — the ATAR is the most common door into university, but it was never the only one.
Common misconceptions about ATAR
“The average ATAR is 50”
50.00 is the middle of the whole age cohort by construction, because ATAR is a percentile rank. But the students who receive an ATAR are a selected group — they completed the eligible subjects — so the typical result among them sits above 50.00. That is why an ATAR in the 60s or 70s is ordinary, not below average, and why no single officially published average exists. See the average ATAR in Australia.
“Easy subjects give you a higher ATAR”
Not necessarily. Scaling adjusts for how strong the cohort in a subject was, not for how easy the subject felt, and a high raw result in any subject contributes more to your aggregate than a mediocre result in a subject that scales well. Picking subjects you can do well in — and that meet the prerequisites of the courses you want — matters far more than picking subjects for their scaling. See how ATAR scaling works.
“Your ATAR follows you forever”
No. The ATAR is a one-time ranking used for undergraduate admission. Once you have started a degree, your university results take over, and once you have graduated, employers ask about your degree, your skills and your experience — not a number from Year 12. See whether ATAR matters after Year 12.
“No ATAR means no university”
No. Diploma-to-degree pathways, TAFE qualifications, bridging courses, portfolio entry and mature-age entry all lead to the same degrees, and thousands of students use them every year. The ATAR is the most direct route for school leavers, not the only route into university. See options with a low ATAR.
Words you will see
Aggregate: the total of your best scaled results, which is ranked to produce your ATAR. Scaling: adjusting subject results so different subjects can be compared fairly. Selection rank: your ATAR plus any adjustment factors for a particular course — the number universities actually select on. Lowest selection rank (cut-off): the lowest selection rank that received an offer for a course in a previous year. Admissions centre: the organisation that processes applications and, in most states, calculates ATARs. Prerequisite: a subject you must have completed to be eligible for a course.
Sources
VTAC • UAC • QTAC • TISC • SATAC • TASC: TE Score and ATAR Calculation (PDF)
Related calculators
Try the VCE ATAR Calculator, the HSC ATAR Calculator, the QCE ATAR Calculator, or the Study Score Calculator to see what your results might mean. If you already have a university GPA and want the other direction, the ATAR to GPA converter gives an approximate range — there is no official conversion. Any result from these calculators is an estimate only — your official ATAR comes from your state’s admissions centre.
Related guides
Read how ATAR is calculated, the average ATAR in Australia, what a good ATAR is, ATAR vs selection rank, ATAR cut-offs, how IB scores convert to ATAR, whether ATAR matters after Year 12, whether ATAR expires and how to improve your ATAR.
Last updated: 18 November 2026.