How is a predicted ATAR worked out?
A predicted ATAR is your ATAR worked out early — before your final results arrive — from the study scores you expect to finish with. The maths is the same as the real calculation: your best English scaled score plus your next three best scaled scores plus 10% of your 5th and 6th scaled scores gives an aggregate of up to 252 — about 210 if no subject scales above 50 — and that aggregate is converted to an ATAR using the aggregate-to-ATAR table. This calculator uses VTAC's official 2025 table, so the prediction is built on the same conversion the real result uses — with the important difference that your scores are guesses, not results.
That difference is what makes a prediction a prediction. Your expected scores are the uncertain part: scaling has not been published yet for your year, your exam results are not in, and your final study scores could land a few points either side of what you expect. A small change in one study score moves the aggregate by about a point, and a point of aggregate is worth roughly 0.6–0.7 of an ATAR point near the middle of the scale and much less near the top.
Worked example
English 40, plus 38, 36 and 34 as your next three best, plus 10% of 32 (3.2) and 10% of 30 (3.0): aggregate = 40 + 38 + 36 + 34 + 3.2 + 3.0 = 154.20, which is a predicted ATAR of about 89.58 — with a planning range of about 87.58 to 91.58.
A note on the numbers: the worked example quotes the official VTAC table directly (an aggregate of 154.20 is 89.60 on the 2025 table). The calculator interpolates between the table's anchor points, so for the same aggregate it gives 89.58 — a difference of 0.02 ATAR points, well inside the ±2 planning range shown with every result. Below an aggregate of 65.93 the official table only says "below 30", so the calculator shows "below 30" instead of an interpolated number.
How the reverse planner works in each state
Each state builds its aggregate differently, so the reverse planner works back from a different total in each state — but the idea is the same everywhere: pick a target ATAR, find the aggregate that reaches it, then show one set of scores that adds up to that aggregate. The table below gives the aggregate an ATAR of 90 needs in each state, and what the planner's numbers are based on.
| State | Aggregate the planner works back from | Aggregate for ATAR 90 | Basis |
|---|---|---|---|
| Victoria (VCE) | Best English + next 3 + 10% of 5th & 6th (max 252) | 155.19 | VTAC 2025 official table |
| New South Wales (HSC) | Best 10 units, including 2 of English (max 500) | 370.00 | Approximate planning anchors |
| Queensland (QCE) | Best 5 scaled subject results (max 500) | 400.00 | Fitted planning model — QTAC publishes no full table |
| Western Australia (WACE) | Best 4 scaled courses + bonuses (TEA max 430) | 269.60 | TISC 2025 table |
| South Australia (SACE) | Best 90 credits (aggregate out of 90) | 76.45 | SATAC 2025 table |
| ACT (BSSS) | Best 3 scaled majors + 0.6 of next best | 272.00 | Approximate planning anchors — BSSS publishes no table |
Every example set of scores the planner shows is an even spread, rounded up so it meets — never falls short of — the aggregate needed, and the planner runs it back through the forward calculation and shows the result. For Victoria, an ATAR of 90 needs an aggregate of 155.19, 99 needs 192.10, and 99.95 needs 211.42 — all exact values from the official VTAC table.
When is a predicted ATAR useful?
A prediction is most useful when you still have decisions to make. In Year 11, it tells you whether the subjects you are choosing can plausibly reach the rank your course needs — if your predicted ATAR is well below a course's cut-off, you still have time to change subjects, lift a weak subject, or look at pathway options. In Year 12, it helps you set realistic preferences: if your predicted ATAR is around 85 and your first preference asks for 95, you should still list it, but your later preferences should include courses you can actually enter. Once you have a predicted ATAR, you can also see what it means on the university scale — our ATAR to GPA converter shows the indicative GPA bands for your predicted result. Read our guide on how to improve your ATAR for what to do when the prediction is lower than you hoped.
A prediction is also useful for early-entry decisions. Some universities make early offers before ATARs are released, based on your school's recommendation or your Year 11 results. Knowing your predicted ATAR helps you judge whether an early offer is worth accepting or whether waiting for your ATAR could open a better course. A school-issued predicted ATAR comes from your school; the number on this page is one you work out yourself from the scores you expect. Our guide on early entry to university explains how those schemes work.
When do the real results arrive?
In New South Wales, HSC results are released on Wednesday 16 December 2026 by NESA, and UAC issues ATARs from 9am the same day. In Queensland, QCE results and Senior Education Profiles arrive from 9am on Wednesday 16 December 2026 through the myQCE Student Portal, and QTAC releases ATARs on Friday 18 December 2026.
What this calculator does not do
First, the forward calculator above is VCE-based. Victoria's system — best English plus three subjects plus 10% increments — is the calculation built into it. If you study in New South Wales, Queensland, Western Australia or South Australia, your state uses a different system, and a VCE-based prediction will not match it. Use the HSC ATAR Calculator, the QCE ATAR Calculator, the WACE ATAR Calculator or the SACE ATAR Calculator for your state instead — or use the reverse planner above, which covers all six states, to work out what scores a target ATAR needs in your state.
Second, it cannot know your scaling. Scaling adjusts your raw scores for subject difficulty and cohort strength, and the scaling report for your year is not published until your results are close. The scores you enter should be your best guess at scaled scores — if you enter raw scores, the prediction will be off, usually too high in subjects that scale down. Our guide on how ATAR scaling works explains the difference.
Third, it cannot account for adjustment factors. Schemes like SEAS can lift your selection rank above your ATAR, so the rank a university actually uses for your application may be higher than the number this calculator gives you. A predicted ATAR is the starting point; your selection rank is what decides offers. See our guide on what a selection rank is for the full picture.
Common mistakes
- Entering raw scores instead of scaled scores. The aggregate is built from scaled study scores (0–60). A raw score of 40 in a subject that scales down is not a scaled score of 40 — your prediction will be too high.
- Treating the prediction as a promise. Your scores are guesses, scaling is unpublished, and the table is rebuilt from each year's cohort. The ±2 planning range is the honest uncertainty — plan around the range, not the single number.
- Using a VCE prediction for another state. HSC, QCE, WACE and SACE all calculate aggregates differently. A VCE-based prediction does not transfer — use your state's calculator.
- Forgetting adjustment factors. SEAS and subject bonuses can lift your selection rank above your ATAR, so a prediction below a cut-off does not always mean the course is out of reach.
How accurate is a predicted ATAR?
Every result on this page is shown with a ±2 planning range: the aggregate is exact arithmetic from the scores you enter, so the uncertainty is in your expected scores, not in the calculation. For New South Wales, one extra caution applies — the reverse planner is sound within about 0.7 ATAR points for targets of 85 and above, but lower down the HSC anchors can be off by 5–37 ATAR points, so a low NSW target is shown as a range rather than a single aggregate.
How we built and checked this
We built this calculator from VTAC's official 2025 Aggregate-to-ATAR table, using 25 anchor points sampled from its 1,400 published rows (ATAR 30.00–99.95), plus two low-end placeholders below ATAR 30 — the same table and the same interpolation as our VCE ATAR Calculator. We checked every anchor against the published table — the largest difference between our interpolation and the table is about 0.19 ATAR points — and every result is shown with a ±2 planning range. The standard test (40, 38, 36, 34, 32, 30) gives an aggregate of 154.20 and a predicted ATAR of 89.58.
Sources — check the official tables
Confirm the current table with the authority that issues it: VTAC 2025 Aggregate-to-ATAR table (PDF) • VTAC • VCAA (study scores and scaling).
Related calculators
VCE ATAR Calculator • Study Score Calculator • Subject Scaling Calculator • HSC ATAR Calculator • QCE ATAR Calculator • WACE ATAR Calculator • SACE ATAR Calculator • Main ATAR Calculator
Related guides
How to Improve Your ATAR • How Is ATAR Calculated? • VCE Study Score Explained • What Is a Good ATAR? • Early Entry to University
Last updated: 18 November 2026.