ACT ATAR Calculator (BSSS — Canberra)

Estimate your ACT ATAR from your BSSS scaled course scores. The official aggregate is your best three scaled major course scores plus 0.6 of your next best course — and this calculator reproduces that formula exactly, while the step from aggregate to ATAR is a simplified planning model, not the official BSSS calculation.

Enter your scaled course scores

Enter your scaled course scores (0–105) and use the Major/Minor picker beside each score to say what that course is. Your best three majors count in full and your next best course counts at 0.6 — the picker, not the slot order, decides which course is the 0.6 one, so your minor goes in the 0.6 slot only if you label it a minor. If you only have unit scores or raw school marks, those are not course scores: a course score is built from your best 80% of unit scores and then scaled, so enter the scaled course score shown on your Tertiary Entrance Statement.

The formula at a glance Best 3 majors 100% + Next best course × 0.6 = Aggregate / 378

The aggregate needs at least three majors. Label each course with the picker — a minor can only count in the 0.6 slot, and a fourth major counts there instead if it scores higher than your minor.


What aggregate do I need for my target ATAR?

Planning backwards: enter the ATAR you are aiming for and the tool works out the aggregate you need, by inverting the same approximate planning anchors the calculator above uses — not an official table, because BSSS does not publish one. Every result is an ESTIMATE ONLY, with the same ±2 planning range.

Enter the scaled course scores from your Tertiary Entrance Statement — not percentages or raw unit scores — and use the Major/Minor picker beside each score to say what each course is. Your result shows the exact aggregate out of 378 and an estimated ATAR with a ±2 planning range, and the reverse planner below the result works out the aggregate you need for any target ATAR.

How to use this calculator

  1. Enter your best three scaled major course scores in Courses 1–3, leaving each picker on Major.
  2. Add a fourth course if you have one in Course 4, and set its picker to Major or Minor as it actually is — the picker, not the slot order, decides which course counts at 0.6.
  3. Press "Calculate ACT ATAR". The result shows your aggregate out of 378, your estimated ATAR, which courses counted and how, and the ±2 planning range.
  4. Plan backwards with the reverse planner underneath the result: enter the ATAR you are aiming for and the tool works out the aggregate you need, using the same approximate planning anchors.

If you label fewer than three courses as majors, the calculator will tell you it needs at least three majors — that is the BSSS eligibility floor, not a quirk of this tool. And if you only have unit scores so far, wait: the calculator needs scaled course scores, which appear on your Tertiary Entrance Statement.

How the ACT ATAR is calculated

The ACT system is run by the ACT Board of Senior Secondary Studies (BSSS), and it works differently from every other state: there are no end-of-year external exams — your results come from school assessments across Year 11 and Year 12, and your ATAR is reported on your Tertiary Entrance Statement. The calculation has four steps. First, your college calculates a course score for each T or H course from your best 80% of unit scores. Second, those course scores are scaled so that results from different courses and different colleges can be compared fairly. Third, the scaled scores are combined into an aggregate. Fourth, the aggregates of all eligible students are ranked and converted into ATARs using a table supplied by the NSW Technical Committee on Scaling — so an ACT ATAR is directly comparable to a NSW ATAR, and the same cut-offs apply to both. UAC states that an ACT student's ATAR is calculated by BSSS in consultation with UAC. For the NSW side of this shared scale, see the HSC ATAR Calculator.

The aggregate is the part this calculator reproduces exactly. BSSS states it plainly: the aggregate is the number produced by adding the best three scaled scores from major courses, and 0.6 of the next best course score, whether that fourth course is a major or a minor. That "3 + 0.6" structure is the whole aggregate — your best three majors count in full, your next best course counts at 60%, and every other course counts for nothing. The maximum is therefore 378: three majors at 105 each plus 0.6 of a fourth course at 105.

How the ACT differs from NSW

Both systems end at UAC and produce directly comparable ATARs, but they get there by different routes:

ACT (BSSS)NSW (HSC)
Assessment100% school-based across Years 11–12; no end-of-year external exams50% school assessment + 50% exam
ScalingAST and OCS scalingUAC scaling of HSC marks
English in the aggregate?No — English counts only if it is among your best coursesYes — your best 2 units of English are compulsory
AggregateBest 3 majors + 0.6 of the next best course (maximum 378)Best 10 units (maximum 500)
Who produces the ATARBSSS in consultation with UACUAC
Cut-offsThe same cut-offs apply to ACT and NSW students

What your estimated ATAR means

An ATAR is a percentile rank, not a mark out of 100. BSSS explains that it ranks you against the full age cohort — the students who would be in the group if everyone stayed on and completed Year 12 — so an estimated ATAR of 85.00 means a performance better than about 85% of that population, or the top 15%. ACT ATARs are reported from 30.00 to 99.95, and an ACT ATAR is directly comparable to a NSW ATAR: the same university cut-offs apply to both.

Worked example

Course scores of 85, 80 and 78 as your best three majors, plus 75 as your next best course: aggregate = 85 + 80 + 78 + (0.6 × 75) = 288.00 / 378, which this planning model estimates at an ATAR of about 92.67 — with a planning range of about 90.67 to 94.67. The aggregate is exact for the scores you enter, but the ATAR step is a simplified model: BSSS does not publish the table that turns aggregates into ATARs, so 92.67 is a planning figure, not your official result.

The planning anchors behind the estimate

These are the approximate planning anchors the calculator interpolates between — not an official table; BSSS does not publish one. Use them to check any result by hand:

AggregateEstimated ATAR
00
10830
15050
19065
23080
26088
29093
32096
34598
36599.5
37899.95

Check the worked example: 288 sits between the 260 → 88 and 290 → 93 anchors, so 88 + (28 ÷ 30) × 5 = 92.67.

Two more worked examples

Lower scores. Best three majors of 60, 55 and 50, plus 45 as your next best course: aggregate = 60 + 55 + 50 + (0.6 × 45) = 192.00 / 378, estimated at about 65.75 — planning range about 63.75 to 67.75. It sits between the 190 → 65 and 230 → 80 anchors: 65 + (2 ÷ 40) × 15 = 65.75.

When the fourth course decides it. Two students share the same best three majors — 80, 78 and 75, worth 233.00. The first student's next best course is 82: aggregate 233 + (0.6 × 82) = 282.20, estimated at about 91.70. The second student's is 60: aggregate 233 + (0.6 × 60) = 269.00, estimated at about 89.50. Same top three — but a 22-point gap in the fourth course is worth 13.20 aggregate points and about 2.20 ATAR points. With no fourth course, the aggregate is simply your best three added together.

The sensitivity follows from the same maths: a 10-point gain in a major adds 10 aggregate points, but 10 points in the fourth course adds only 6 — so a major is worth about 1.7 times as much.

What is a BSSS course score?

A course score is not a percentage and not a raw school mark. Your college builds it from your unit scores — the marks you earned in each semester unit across Year 11 and Year 12 — taking your best 80% of them. BSSS says course scores typically lie between 30 and 105. That range surprises students who expect marks out of 100, but it is the scale the system runs on: 85 is a strong result, and a score above 100 is possible because the scale runs to about 105.

The 80% rule

Your college does not use every unit score: it builds each course score from your best 80% of unit scores. For a four-unit major, only your best 80% counts, so a single weak unit has little effect on the course score — one bad semester cannot sink it on its own. The 80% rule is also why a course score is not a percentage: it is a rank-based score on the 30–105 scale, built from your strongest units and then scaled.

Only T and H courses count towards an ATAR: T courses are Tertiary courses, deemed to prepare students for higher education, and H courses are Higher Education courses. Accredited (A) courses do not contribute to the aggregate, however well you do in them — entering one here will give a wrong estimate, because the official calculation would never have counted it.

An H course is designed and accredited by an Australian higher education provider, and successful completion counts towards an undergraduate degree with that provider and towards your ACT Senior Secondary Certificate. BSSS says H courses may contribute to your ATAR calculation — an H course counts when it is one of your best three majors, or as the 0.6 fourth course. Major or minor is a matter of length (a major needs at least 3.5 standard units, a minor 2), so an H course is a major when it runs long enough to be one.

Majors, minors and the 3.6-course aggregate

A major is a longer course, typically four units across Years 11 and 12, and a minor is a shorter one, typically two units. The aggregate takes your best three majors at full weight and then your next best course — major or minor — at 0.6. That fourth slot is the only place a minor can count, and it can also be filled by a fourth major if that scores higher. Courses beyond those four contribute nothing, however strong they are. Use the Major/Minor picker beside each score in the calculator above to say which slot is your minor — the picker, not the slot order, decides which course counts at 0.6.

Double majors and major-minors

BSSS also defines longer course types by duration: a major-minor needs at least 5.5 standard units and a double major at least 7.0 — for example, Specialist Mathematics and Mathematical Methods taken together as one package. Both exceed the 3.5-unit minimum for a major, so in this calculator enter a double major or major-minor as a Major: the picker offers Major or Minor only, and a longer course still produces a single course score that counts like any other major. Check the weighting column on your Tertiary Entrance Statement to see what actually counted — any course outside your best 3.6 carries a weighting of 0.

One consequence students often miss: unlike the VCE or HSC, the ACT aggregate has no compulsory English slot. The formula is simply your best three majors plus 0.6 of the next best course — English counts only if it is among your best courses. English still matters for your certificate and for university prerequisites, but it is not forced into the aggregate the way it is in Victoria or New South Wales.

The Tertiary Entrance Statement

Your Tertiary Entrance Statement (TES) is the document BSSS produces for every student who meets its requirements: it reports the information used to calculate your ATAR, including the ATAR itself. It shows your scaled course scores, each course's weighting — how much of the 3.6 it contributes — and the weighted scaled scores, each scaled score multiplied by its weighting.

What you need to qualify for a TES

For a standard package, BSSS requires at least 20 standard units; four majors and one minor, or three majors and three minors; at least three T/H majors and one T/H minor; and sitting all components of the ACT Scaling Test. Miss any component of the AST, and you have not met the requirements for a TES. With fewer than three T or H majors, you do not meet the standard-package requirements — and without a TES there is no ATAR. Students on an abridged package have different requirements; check yours with your college.

The AST and OCS scaling

Because every college sets and marks its own assessments, a course score of 85 at one college might not mean the same as 85 at another. The ACT Scaling Test (AST) exists to fix that. All ATAR-seeking students sit the AST in Term 3 of Year 12, and BSSS uses it — with students' best course scores — to scale course scores onto a common scale across colleges and courses. The method is called Other Course Score (OCS) scaling: it adjusts each scaling group's course scores to a mean and standard deviation related to the group's AST results and best course scores, repeating until the changes become insignificant.

Two things about scaling matter for anyone using this calculator. First, scaling changes the score used to represent your rank in a scaling group, but not the ranking of students within it — if you were ahead of another student before scaling, you are still ahead after it. Second, you cannot reproduce scaling yourself: it depends on your whole scaling group's AST results. That is why this calculator asks for scaled course scores, not raw unit scores or school percentages: unscaled marks will give a meaningless estimate.

What this calculator does not do

First, it does not reproduce the official aggregate-to-ATAR conversion, because no such table is published. The official process ranks every eligible student's aggregate and converts it to an ATAR using a table supplied by the NSW Technical Committee on Scaling — a table that changes with each year's cohort. The conversion on this page is a simplified planning model — straight-line interpolation between approximate planning anchors — labelled as such in the code and in every result. Treat the ATAR figure as a rough guide to where your aggregate might land, not as a prediction of your official result.

Second, it cannot do your scaling. The scores you enter must already be scaled course scores, so the most useful time to use this calculator is after your Tertiary Entrance Statement arrives, or when your college can give you a realistic estimate of your scaled scores. Raw percentages or unit scores will produce a number, but not a meaningful one.

Third, it cannot account for adjustment factors: your selection rank — the number universities compare against cut-offs — can be higher than your ATAR once factors are added. Use our Selection Rank Calculator to estimate that, and read our guide on what a selection rank is for the full picture, and our guide to ATAR bonus points.

Common mistakes

  • Entering percentages or unit scores instead of scaled course scores. Course scores are built from your best 80% of unit scores and then scaled, typically running from 30 to 105. A school percentage of 85 is not a course score of 85.
  • Counting an A course. Only T and H courses contribute to the ACT aggregate — an Accredited course result does not count, however high it is.
  • Counting more than four courses. Only your best three majors plus 0.6 of your next best course count. A fifth or sixth course adds nothing to the aggregate.
  • Treating the estimate as official. The aggregate formula is official; the conversion to an ATAR here is a simplified planning model. Your official ATAR is calculated by BSSS using a conversion table supplied by the NSW Technical Committee on Scaling — a table that is not published.

How we built and checked this

We built the aggregate step directly from BSSS's official description: best three scaled major course scores plus 0.6 of the next best course score, on the 0–105 scale BSSS describes. The aggregate-to-ATAR step is a simplified planning model using approximate anchors, because BSSS does not publish the conversion table — and every result is labelled ESTIMATE ONLY with a ±2 planning range. Hand-checked example (85, 80, 78, 75): aggregate 288.00, estimated ATAR 92.67.

Sources — check the official tables

Confirm the current guidance with the issuing authority: BSSS — Scaling and the ATAR (aggregate, OCS scaling, AST, TES) • BSSS — ACT Qualifications (H courses, TES requirements) • UAC — ATAR Compass (ACT ATARs calculated by BSSS in consultation with UAC) • UAC • VTAC • QTAC • TISC • SATAC

Related calculators

Selection Rank Calculator • HSC ATAR Calculator • VCE ATAR Calculator • QCE ATAR Calculator • WACE ATAR Calculator • SACE ATAR Calculator • Predicted ATAR Calculator • Main ATAR Calculator

Related guides

What Is a Selection Rank? • How Is ATAR Calculated? • How ATAR Scaling Works • ATAR Cut-Offs Explained • What Is a Good ATAR?

Last updated: 18 November 2026.

FAQ

ACT ATAR questions

Your college calculates a course score for each T or H course from your best 80% of unit scores, BSSS scales the scores with the OCS method using the AST, then builds an aggregate from your best three scaled major course scores plus 0.6 of your next best course. BSSS ranks the aggregates and converts them to ATARs using a table supplied by the NSW Technical Committee on Scaling.

No. The aggregate formula on this page is the official BSSS formula, but the conversion from aggregate to ATAR is a simplified planning model — BSSS does not publish an aggregate-to-ATAR table. Every result is an ESTIMATE ONLY, and your official ATAR is calculated by BSSS and reported on your Tertiary Entrance Statement.

Your scaled course scores, typically between 30 and 105 — not percentages and not raw unit scores. Enter your best three major course scores first, then your next best course (major or minor) if you have one. Scaled course scores appear on your Tertiary Entrance Statement.

No — the ACT aggregate has no compulsory English slot. It is simply your best three majors plus 0.6 of your next best course, so English counts only if it is among your best courses. English can still be required for your certificate or for university prerequisites, so check the course requirements.

The ACT Scaling Test is sat by ATAR-seeking students in Term 3 of Year 12. BSSS uses it in OCS scaling to place course scores from different colleges and courses onto a common scale, so results can be compared fairly. Your AST result does not directly adjust your own course scores — it sets the parameters for your scaling group.

378 — three majors at 105 each, plus 0.6 of a fourth course at 105. In practice no student reaches it, because course scores at the very top of the 30–105 scale are rare. The aggregate is only the middle step: it is then ranked against every other eligible student to produce the ATAR.

The document BSSS produces for students who meet its requirements. It reports the information used to calculate your ATAR — your scaled course scores, each course's weighting, the weighted scaled scores and your aggregate — and your ATAR itself is reported on it. The scaled course scores on your TES are the numbers to enter in this calculator.

No — not under the standard package. BSSS requires at least three majors and one minor classified T or H, at least 20 standard units, and sitting all components of the ACT Scaling Test. Without three T or H majors you do not meet the requirements for a Tertiary Entrance Statement, and without a TES there is no ATAR.

No — enter scaled course scores, typically between 30 and 105. A unit score (0–130 per semester) is a single semester's mark; a course score is built from your best 80% of unit scores and then scaled by BSSS. Unit scores will give a wrong estimate, because the aggregate formula runs on scaled course scores. Your scaled course scores appear on your Tertiary Entrance Statement.

A longer course type: BSSS defines a double major as a course of at least 7.0 standard units (a major needs at least 3.5, a major-minor at least 5.5, a minor at least 2). In this calculator, enter a double major or major-minor as a Major, since it exceeds the major minimum — the picker offers Major or Minor only. It still produces a single course score, and it counts like any other major if it is among your best three.