How Does ATAR Scaling Work? Explained Simply

Scaling is the part of the ATAR system that confuses students most — and it is also the part that causes the most bad advice. In plain language: scaling adjusts your subject results so that students in different subjects can be compared fairly.

17 min readGuide

What does scaling actually do?

Your ATAR is a rank, not a mark. It compares you with every other student in your state, and to do that fairly the system first has to compare students who took completely different subjects. A student who took advanced mathematics and a student who took food studies cannot be compared on raw marks alone, because the two subjects are assessed differently and attract different groups of students. Scaling is the adjustment that makes that comparison fair. If you are still working out what the rank itself means, start with our guide to what an ATAR is.

Think of it this way. In every subject, the students who take it are not a random sample of the whole year group. Some subjects attract very strong students, while others attract students who are less strong on average. If raw marks were used directly, students in subjects with stronger cohorts would be at a disadvantage, because the same raw mark means something different in a strong group than in a weaker one. Scaling corrects for this by adjusting each subject's results according to how strong its cohort was.

A simple way to picture it is currency conversion: a mark of 80 in one subject is not worth the same as a mark of 80 in another, just as one pound is not worth the same as one dollar. Scaling is the exchange rate that puts every subject on the same footing, so a result in one subject can be compared with a result in any other.

Scaling is recalculated every year from that year's cohort. That is the single most important fact about scaling, and it is the one most students get wrong. Last year's scaling does not fix this year's scaling. A subject that scaled up last year may scale down this year if the cohort changes. Any scaling figure you remember from a previous year is a guide at best, never a promise about your own results.

Why do subjects scale up or down?

A subject scales up when the students who took it also did well in their other subjects. That pattern tells the system the cohort was strong, so the subject's marks are adjusted upwards. A subject scales down when its students did less well in their other subjects on average, which suggests the cohort was weaker, so the marks are adjusted downwards. Notice what this means: scaling is not about how hard the subject is, but about how strong the students who chose it were.

This is why advanced subjects often scale up. Specialist mathematics, for example, is usually taken by students who are strong across the board — in Victoria in 2025 it had a scaled mean of 41.5, the highest of any mathematics study. The same logic applies to some languages and to other subjects with selective cohorts. But the cohort changes every year, and with it the scaling. Which subjects scale up most varies by state — see the best scaling subjects, with official 2025 figures for Victoria, Queensland and Western Australia, and course relativities for New South Wales from UAC's Table A3, which UAC says should not be used as a simple conversion table.

What is a scaled mean?

A scaled mean is the average scaled score of everyone who took a subject in a given year — the single number that sums up how the whole cohort scaled. In Victoria, where study scores run from 0 to 50 and the average study score is 30, the rule is simple: a scaled mean above 30 means the subject scaled up on average, and below 30 it scaled down. In 2025, Latin had the highest scaled mean in Victoria at 45.0, and Foundation Mathematics the lowest at 21.6.

But the mean describes the cohort, not your score. A score above 30 can still scale down — a study score of 35 in English became 33 in 2025 — and a score below 30 can still scale up — a 25 in Specialist Mathematics became 36. Read the mean first to judge a subject, then look up your own score in the table.

How scaling works — a table lookup, not a percentage

Scaling is not a formula you apply to your mark. It is a lookup in an official table: your result goes in, and the table tells you the scaled result that goes with it. In Victoria, VTAC's scaling report lists the scaled score for each study score — in 2025, a study score of 30 in Chemistry became 34, while a 30 in English became 28. The same study score becomes a different scaled score in different subjects, and there is no single percentage that explains both: no multiplier turns 30 into 34 and 30 into 28 at the same time.

Queensland works the same way, with a different table. QTAC's Table 6 gives raw-to-scaled pairs at five percentiles, so a median raw result of 82 in Specialist Mathematics scaled to 95.27 in 2025, while a median raw 69 in General Mathematics scaled to 59.54. The mapping is also not a straight line — the gap between raw and scaled changes as you move up the range, which is why you cannot work it out from one example.

If someone quotes you a scaling percentage for a subject, it is not from an official report: no subject has a percentage factor in any published table. To find your own scaled score, look your result up in the table for your state and year — the tables live on our ATAR scaling calculator for Victoria and Queensland, and in the official reports linked in Sources below.

Who does the scaling in each state?

Scaling is done by the tertiary admissions centre in your state, using that year's results. In Victoria, VTAC scales VCE study scores and publishes its scaling report, based on results from the VCAA. In New South Wales, UAC scales HSC marks using its annual scaling report. In Queensland, QTAC publishes the scaling data for the QCE system in its ATAR Report — Table 6 is the raw-to-scaled mapping for General subjects. In Western Australia, TISC publishes mean scaled scores and scaled-score percentiles for WACE courses, but no raw-mark column, so there is no table that converts a raw mark into a scaled score. In South Australia, SATAC does not publish scaled scores for individual subjects at all. The ACT scales through a common aptitude test rather than per-subject tables, and Tasmania's course scaling document describes past outcomes and warns against using it to predict future years.

So not every state publishes a table you can look a score up in. Victoria publishes the most complete picture — a scaled score for every study score — and Queensland publishes raw-to-scaled pairs at five percentiles. Western Australia's figures show which courses sit highest, not how far a given raw mark travels, and South Australia publishes no per-subject figures at all. The only reliable source for real scaling figures is the current year's publication from your own state's body — not a forum post, not a video from last year, and not a table copied from a different state. You can try the numbers yourself with our ATAR scaling calculator, which uses the 2025 reports for Victoria and Queensland only. New South Wales is not covered: UAC's own report says requests to use its data in ATAR calculators will generally not be granted, so no NSW mode is built from its tables. For the other states, use your state's calculator — the WACE, SACE and ACT calculators — which work from the figures those bodies do publish.

For a hands-on look at how a scaling adjustment changes a score, try our Subject Scaling Calculator. It lets you enter a raw score and apply an assumed scaling factor, with the factor clearly labelled as your assumption rather than an official value — use it to build your understanding, then check the official scaling report for the real figures, which come from a table, not a percentage.

From scaled results to your ATAR

Scaling happens before your ATAR is calculated. Your raw subject results are scaled first, then combined into an aggregate, and that aggregate is converted into your ATAR rank — our guide to how ATAR is calculated explains each step in full. The aggregate is built differently in every state, so the same scaled scores would give a different aggregate in a different state:

StateSystemHow the aggregate is built
VictoriaVCEBest four scaled study scores, plus 10% of a fifth and sixth — see the VCE ATAR Calculator
New South WalesHSCBest 10 units, including English — see the HSC ATAR Calculator
QueenslandQCEBest five scaled General subjects — English counts only if it is among the best five — see the QCE ATAR Calculator
Western AustraliaWACEBest four scaled course scores (TEA), plus 10% bonuses for LOTE, Methods and Specialist — maximum TEA 430 — see the WACE ATAR Calculator
South AustraliaSACEBest 90 credits of scaled Stage 2 results, worked out credit by credit — see the SACE ATAR Calculator
ACTBSSSBest three scaled majors, plus 0.6 of the next best course — see the ACT ATAR Calculator
TasmaniaTCEBest five Level 3 or 4 courses over two years — a TE Score of 60 to 75 points — see our guide to what an ATAR is

Two things that are often confused with scaling are not scaling at all. Adjustment factors — sometimes still called bonus points — are added by universities for equity schemes such as SEAS, subject results or location, and they raise your selection rank, never your ATAR. Your ATAR is fixed by your aggregate; the factors are applied separately for each course you apply for. Our guide to ATAR vs selection rank explains the difference in full.

Special cases in Victoria: mathematics and languages

Two Victorian rules are the source of most of the bad advice about scaling, so they are worth stating plainly. First, there is no +10% mathematics bonus in VCE. VTAC scales all four mathematics studies against each other as well as against all other studies, and uses the higher of the two resulting scales — there is no percentage bonus added to any mathematics score.

Second, languages do get an adjustment, but it is not five points on your ATAR. VTAC adds 5 to the scaled-score average for a language study — for study scores at, or close to, the average of 30, the adjustment is 5 — and the adjustment gets smaller as the study score moves away from 30. It is an adjustment to the scaled score of that one study, not five points added to your ATAR.

Myths about scaling

Most of the wrong advice about scaling comes in the form of a confident claim. These are the ones worth retiring:

Myth 1: “Picking easy subjects gives you a higher ATAR.” No — scaling reflects cohort strength, not difficulty, and a subject that scales down slightly still rewards a strong raw result more than a weak result in a subject that scales up. The students who do best usually pick subjects they are good at and enjoy, not the ones they chase for scaling.

Myth 2: “There is a +10% bonus for mathematics.” Not in Victoria: VTAC scales the four mathematics studies against each other and against all other studies and uses the higher scale — no percentage bonus. Western Australia does add 10% bonuses for Mathematics Methods, Mathematics Specialist and a language other than English when building the TEA, but that is a WA aggregate rule, not a scaling percentage, and it does not apply in other states.

Myth 3: “Scaling is fixed — the same subjects always scale the same way.” No. Scaling is recalculated every year from that year's cohort. A subject that scaled up last year may scale down this year if the cohort changes, so last year's figures are a guide at best.

Myth 4: “Bonus points are part of scaling.” No. Adjustment factors raise your selection rank, never your ATAR. Scaling changes your subject results before the aggregate is formed; adjustment factors are applied afterwards, separately, for each course you apply for.

Myth 5: “Scaling alone decides your ATAR.” No. Scaling is only the first step. Your scaled results still have to be combined into an aggregate under your state's rules, and that aggregate still has to be ranked against your whole age cohort. Two students with the same scaled scores in different states can end up with different ATARs, because the aggregate rules differ.

Should you pick subjects for scaling?

Usually not. A subject that scales down is not a bad subject, and it is not one you should avoid. A high raw result in a subject that scales down slightly will usually count for more than a low raw result in a subject that scales up — and the trap is built into the system: a subject scales up because its cohort is strong, so to benefit you have to keep up with the strongest students in the state, not just pass.

Check prerequisites first. Many degrees require particular subjects, and no amount of scaling in an unrelated subject makes up for missing one. Then choose on ability, interest and prerequisites. Our guide to the best scaling subjects shows the 2025 figures state by state if you want to see how your subjects were treated last year — treat them as background, not as a prediction, because the cohort that produces next year's scaling has not sat its exams yet.

How do I use the official scaling reports?

Start by finding the publication for your state and your year: VTAC's scaling report in Victoria, UAC's scaling report in New South Wales, QTAC's ATAR Report (Table 6) in Queensland, and TISC's course statistics in Western Australia. South Australia publishes no per-subject scaled scores, so there is no SA table to look up — SATAC's scaling FAQs explain what it does publish. Each publication is for one year only, so if you are planning subject choices for next year, use the most recent report as a guide.

When you read the report, look up your own subjects and compare the raw and scaled figures. Pay attention to the direction and the size of the adjustment, but do not overreact to small differences — a subject that scales up or down by a small amount will not transform your ATAR. In Victoria, the report is written in study scores — see what a VCE study score is if you are still working out what your own scores mean. Focus on the subjects where you can achieve a strong raw result. If you are choosing subjects for next year, use the report as one input among many: your interests, your strengths and your prerequisites should matter more than a scaling figure that will change anyway.

Common mistakes

  • Treating last year's scaling as this year's. Scaling is recalculated every year — always use the current year's report.
  • Choosing subjects only for scaling. A subject that scales well also has a strong cohort, so you need a strong result to benefit.
  • Thinking scaling is about difficulty. Scaling reflects the strength of the cohort that took the subject, not how hard the subject is.
  • Using another state's figures. Scaling is calculated separately in each state. A figure from Victoria tells you nothing about the same subject in New South Wales.
  • Treating a scaled mean as your own scaled score. A scaled mean describes the whole cohort. Your own scaled score comes from looking up your result in the table — a subject with a high mean still scales some individual scores down.
  • Looking for a percentage factor. No subject has a percentage scaling factor in any official report. If a table or video quotes one, it is not from the admissions centre.

Sources — check the official tables

VTAC — 2025 Scaling Report (PDF) • VTAC — ATAR and Scaling Guide 2026 • UAC — Report on the Scaling of the 2025 NSW Higher School Certificate (PDF) • QTAC — ATAR Report 2025 (PDF) • TISC — 2025 Course Statistics Summary (PDF) • SATAC — Scaling FAQs • VCAA

Related calculators

See scaling in action with the Subject Scaling Calculator and the ATAR Scaling Calculator, then estimate your rank with the VCE ATAR Calculator, the HSC ATAR Calculator, the QCE ATAR Calculator, the WACE ATAR Calculator, the SACE ATAR Calculator, the ACT ATAR Calculator or the Predicted ATAR Calculator, or start from the Main ATAR Calculator. Remember that every calculator result on this site is an ESTIMATE ONLY — always check the official scaling report for your state and year for the real figures.

Related guides

How Is ATAR Calculated? • What Is an ATAR? • Best Scaling Subjects • VCE Study Score Explained • What Is a Good ATAR?

Last updated: 18 November 2026.

FAQ

Scaling questions

Scaling adjusts each subject’s results for the strength of the cohort that took it, so students in different subjects can be compared fairly. It is recalculated every year by the state authority — VTAC in Victoria, UAC in New South Wales, and the equivalent body in each other state.

A subject scales up when its students also did well in their other subjects, which shows the cohort was strong. It scales down when its students did less well on average. Scaling reflects cohort strength, not how hard the subject is.

For Victoria, VTAC’s scaling report; for New South Wales, UAC’s scaling report; for Queensland, QTAC’s ATAR Report, Table 6; for Western Australia, TISC’s course statistics, which give mean scaled scores rather than a raw-to-scaled table. South Australia publishes no per-subject scaled scores, and the ACT and Tasmania have no per-subject tables either. Each publication is for your year — use the current one, not last year’s.

Usually not. Scaling rewards strong cohorts, so a subject that scales well is also a subject where you need a strong result to benefit. A high score in a subject you are good at almost always counts for more than a low score in a high-scaling subject.

It depends on your state, and it changes every year. In 2025, Latin had the highest scaled mean in Victoria at 45.0 out of 50, and Specialist Mathematics had the highest median scaled result in Queensland — a raw 82 became 95.27. Languages and advanced mathematics usually sit near the top because their cohorts are strong, but the order changes with each year’s cohort, so last year’s leaders are not a promise about your results.

No. Each state scales its own subjects, on its own scale, from its own cohort. Victoria scales VCE study scores out of 50, Queensland scales raw results out of 100, and New South Wales, Western Australia and South Australia each use their own system. A figure from one state tells you nothing about the same subject in another.

Yes. Scaling is recalculated from each year’s cohort, so a subject that scaled up one year can scale differently the next. The figures on this page are from the 2025 reports — always use the current year’s report for your own results.

No. Scaling is a lookup in an official table, not a percentage added to your result. In Victoria in 2025, a study score of 30 in Chemistry became 34 and a 30 in English became 28 — no single percentage produces both of those results. If someone quotes you a scaling percentage for a subject, it is not from an official report.