What is the average ATAR in Australia?
The figure you will see quoted most often is around 70.00. Most guides that give a number put the typical result among students who receive an ATAR at around 70.00 — but treat that as a reported consensus, not an official fact. No admissions centre publishes an official average ATAR, and the figure is not an average computed from a published official table. One guide attributes the figure to UAC, but that attribution has not been verified against UAC’s own publications, so we do not repeat it here as a sourced fact.
You will also see the same figure described as both an average and a median, sometimes on the same page. Sources use the two words interchangeably for the 70.00 figure, and none of them explains which statistic it is. The honest way to read it is as the typical result among students who receive an ATAR — a rough centre of the recipients’ results, not a precise statistic.
The official bodies do not publish a single average ATAR figure. VTAC, UAC, QTAC, TISC and SATAC each publish information about ATARs in their own state, but none of them publishes an official “average ATAR” for the country — and there is a good reason for that: an average of a percentile rank does not mean what most people think it means. Treat any single figure quoted as the average ATAR as a reported consensus, not an official fact — and check whether the site says where its number came from.
The problem is not a lack of data. It is that ATAR is a rank, and averages of ranks are misleading. A rank tells you a position, not a quantity. Averaging positions gives you a number that looks precise and tells you very little, because the students in the ranking are not spread evenly across the scale.
What does the middle of the rank mean?
ATAR is a percentile rank from 0.00 to 99.95 that compares a student with their age cohort. By construction, 50.00 is the middle of the whole age cohort: a student with an ATAR of 50.00 performed better than half of the age group and worse than the other half. That is what the number means, by definition, and it is the only “average” that the scale itself guarantees.
But that middle point is not the same as the average result of the students who actually receive an ATAR, and the difference is important. Not every student in the age cohort receives an ATAR. To get one, a student generally needs to complete an eligible combination of subjects and meet their state’s requirements. Students who do not meet those requirements — including students who leave school early, who take a vocational pathway, or who do not complete the required subjects — still count as part of the age cohort for ranking purposes, but they do not receive an ATAR.
Because of that, the students who do receive an ATAR are not a random sample of the cohort. They are the students who completed the eligible subjects, and as a group they tend to sit above the middle of the whole cohort. So the typical ATAR among students who received one is higher than 50.00 — not because the scale is rigged, but because the group receiving ATARs is a selected group. An ATAR of 50.00 is the middle of everyone; the middle of the students who received an ATAR sits above it.
Why is the typical ATAR around 70, not 50?
The answer is the selection effect described above. The 50.00 middle is the middle of the whole age cohort — everyone in the year group, including students who never receive an ATAR. The typical result among recipients is measured over a smaller, selected group: the students who completed the eligible subjects and stayed on to receive a rank. That group sits above the middle of the full cohort, so its typical result sits above 50.00 as well.
That is why the figure most guides report is around 70.00 rather than 50.00. It is not that the scale is rigged or that the middle has moved — it is that the two numbers describe two different groups. 50.00 is the middle of everyone; around 70.00 is the reported typical result of the students who actually received an ATAR.
Why averages of a rank mislead
There are two separate reasons why an average ATAR is a misleading number, and both come from the fact that ATAR is a rank rather than a mark.
The first reason is the selection effect described above. If you average only the ATARs that were issued, you are averaging a group that excludes a large part of the cohort. The students who did not receive an ATAR are missing from the calculation entirely, and they are not missing at random. Any average computed from the issued ATARs alone will be higher than the average across the whole cohort, and it will tell you nothing about where a typical student in the full cohort sits.
The second reason is that the ATAR scale is not evenly spaced in terms of performance. Near the top of the scale, students are packed very closely together: the difference in actual results between an ATAR of 99.00 and an ATAR of 99.95 is small in absolute terms, even though the numbers look far apart. Near the middle of the scale, the same gap in ATAR points represents a much larger difference in results. Averaging numbers that are not evenly spaced treats every point on the scale as if it meant the same thing, and it does not. The result is a figure that looks meaningful but conceals how the scale actually works.
Three myths about the average — busted
- “Half of students get below 50.” False. 50.00 is the middle of the whole age cohort, but students who receive an ATAR are a selected group sitting above that middle — so most recipients sit above 50.00, not half below it.
- “An ATAR of 90 means I got 90%.” False. ATAR is a rank, not a mark: an ATAR of 90 means you outperformed 90% of your age cohort, not that you scored 90% on anything.
- “Below 70 is subpar.” False — and it contradicts the figure itself. If the typical result among recipients is around 70, then roughly half of all recipients sit below 70. A result below 70 is ordinary; whether it is good enough depends on the cut-off for the course you want.
Does the average differ by state?
Yes, slightly. The typical result varies a little from state to state, because each state has a different cohort, different subject patterns and different pathways into an ATAR. The differences are small compared with the spread within any one state — the gap between two students in the same state is far larger than the gap between state averages.
What you will not find is an official state-by-state table. No admissions centre publishes an official median ATAR for its state, so any state averages you see quoted online are estimates, not official figures, and they should be treated that way. If you want to know what your result means in your state, the useful comparison is still the cut-off for the course you want in that state, not a state average.
You can estimate your own result for your state with the VCE ATAR Calculator, the HSC ATAR Calculator, the QCE ATAR Calculator, the WACE ATAR Calculator or the SACE ATAR Calculator.
What does your ATAR mean in percentile terms?
Forget the average for a moment and read your ATAR as what it is: a percentile. The table below follows directly from the definition of the rank — no survey or official table is needed to fill it in.
| Your ATAR | What it means |
|---|---|
| 60 | You outperformed 60% of your age cohort |
| 70 | You outperformed 70% of your age cohort |
| 80 | You outperformed 80% of your age cohort |
| 90 | You outperformed 90% of your age cohort |
| 95 | You outperformed 95% of your age cohort |
That reading is the whole point of the rank. An ATAR of 80 does not mean you scored 80% — it means you sit above four-fifths of your age cohort. The same reading works at every point on the scale, including the top: the students at the very top are a small minority, because only a small share of the cohort can sit above 95% of it.
The distribution of issued ATARs is skewed towards the top compared with the full cohort, because not every student in the cohort receives an ATAR. The middle of the issued ATARs is above 50.00, and the share of students in the highest bands is larger than you might expect if you assumed the results were spread evenly.
The published cut-off profile for a course is the practical form of that distribution: the lowest, median and highest selection ranks of the students who received offers. Our guide to ATAR cut-offs explains how to read one.
Is 70 a good ATAR?
In percentile terms, yes for most purposes: an ATAR of 70 means you outperformed 70% of your age cohort, and it sits around the typical result most guides report among students who receive an ATAR. It is not a below-average result, and anyone who calls a result below 70 “subpar” is contradicting the figure itself — if the typical result among recipients is around 70, then roughly half of all recipients sit below 70.
Whether 70 is good enough for you depends on the course. Some degrees set their cut-offs well below 70, others well above it, and the cut-off is the only number that decides entry. Our guide to what counts as a good ATAR explains how to judge your result against the courses on your own list.
How can I read my own result without an average?
If there is no average to compare against, how do you know whether your ATAR is good? The answer is the same one we give in our guide to what counts as a good ATAR: compare your result with the selection ranks of the courses you actually want. Your ATAR is a tool for university entry, and its value is measured against the cut-offs of the courses on your preference list, not against a national average.
That comparison is more useful than any average could be. A result that sits below some notional national average may still be well above the cut-off for the course you want, and a result above the average may still fall short of a highly competitive course. The average tells you nothing about either situation. The cut-off tells you exactly where you stand for the course that matters to you.
As an illustration, teaching degrees show how wide the range is: our guide on the ATAR needed for teaching notes that some teaching degrees ask for a rank in the 80s and others in the 60s — the same profession, very different cut-offs, depending on the university and the stream. That is why a single national average can never tell you whether your result is enough.
And if your result falls short of the cut-off for the course you want, the ATAR is not the only way in. Diploma-to-degree programs, TAFE and VET qualifications, foundation programs, mature-age entry and early-offer schemes all provide routes into university without the ATAR a course’s cut-off would otherwise require. Our guide on what to do with a low ATAR covers these pathways in detail.
What this means for you
The search for an average ATAR usually comes from a simple worry: “Is my result normal?” The honest answer is that there is no single normal number — but the percentile reading gives you a better answer than any average could. An ATAR of 70 means you outperformed 70% of your age cohort; an ATAR of 80 means 80%. That is where you stand, and it does not depend on any published average.
A better question than “what is the average?” is “what does my ATAR open up?” Check the cut-offs for the courses you want, and look at pathway programs if your result falls short. Your ATAR is a position in a ranking, and its practical meaning is the set of doors it opens.
Some students also ask whether the number keeps mattering once they are in. For most graduates it does not — your university results take over quickly. Our guide on whether ATAR matters after Year 12 explains when the number counts and when it stops counting.
Sources — check the official tables
VTAC • UAC • QTAC • TISC • SATAC
Related guides
Read our guides to what ATAR is, how ATAR is calculated, what counts as a good ATAR, how ATAR cut-offs work and whether ATAR matters after Year 12.
Related calculators
Estimate your result with the VCE ATAR Calculator, the HSC ATAR Calculator, the QCE ATAR Calculator, the WACE ATAR Calculator, or the SACE ATAR Calculator.
Last updated: 18 November 2026.