SEAS Calculator

SEAS can lift your selection rank above your ATAR — but nobody can tell you by how much until the university decides. This calculator is a what-if estimator: enter your VCE aggregate or ATAR plus the SEAS adjustment you are assuming, and it shows the selection rank that adjustment would give.

SEAS Calculator

Enter your VCE aggregate (0–252) or your ATAR (0–99.95), then the SEAS adjustment you are assuming, in aggregate points (0–20). The adjustment is added to your aggregate, and a new selection rank is calculated from the adjusted aggregate using the VTAC 2025 aggregate-to-ATAR table. If you have no SEAS claim, enter 0 — your selection rank is then simply your ATAR.

The formula at a glance VCE aggregate 0–252 + Assumed SEAS points 0–20 = Selection rank, capped at 99.95

About the 0–20 range: VTAC publishes no maximum for SEAS — this is the tool's input range, not a published cap. It covers the highest institution-published figure we verified: RMIT's "up to 20 aggregate points". Other institutions publish their own maxima, so check the university's own rules for the course you want. Do not enter ATAR points here — SEAS points are aggregate points, a different unit.

Start from

VTAC does not publish how many points any SEAS category is worth — each institution decides, the figure varies by institution and course, and VTAC does not tell you the outcome. Every result on this page is an estimate only, for planning, and an application can also result in no adjustment and does not guarantee an offer.

What is SEAS?

SEAS — the Special Entry Access Scheme — is run by VTAC, the Victorian admissions centre, for students applying to Victorian universities whose education was disadvantaged by circumstances beyond their control. VTAC now calls the scheme "equity schemes and scholarships" — the name changed, the idea did not. VTAC puts the purpose plainly: "Equity Schemes helps compensate for educational disadvantage by making your application more competitive. It increases your selection rank but does not change your ATAR." Our guide on what SEAS is explains the scheme in depth, including who qualifies and how to apply.

SEAS is not a separate entry pathway and it is not a reserved place. You still apply for the same courses through the same system, and you still need to meet the course prerequisites. What SEAS does is tell the university, with evidence, that your ATAR understates your ability — and the university then weighs that when it decides whether to offer you a place. It can be the difference between just missing a cut-off and just making it.

The four SEAS categories

VTAC lists four categories of equity schemes. They describe eligibility only — no number is attached to any category, and VTAC publishes no point value for any of them. Do not let anyone sell you a table that says a category is "worth" a fixed number of points: no such table exists.

  1. Personal information and location — automatic, no evidence needed. This covers age, Indigenous recognition, location, attending an under-represented school, under-represented gender in a field, a non-English-speaking background, and being the first in your family to attend university.
  2. Financial hardship.
  3. Disability or medical condition.
  4. Difficult family and life circumstances.

You do not need to qualify under all four — one category is enough, and you can apply under more than one if several apply to you. What you do need is evidence for the categories that require it: documents that show the circumstance and that it affected your studies. Category 1 is automatic and needs no evidence; the other three do, and VTAC lists exactly what it wants for each one.

How SEAS changes your selection rank

SEAS works differently from the adjustment factors used in New South Wales, Queensland and Western Australia. There, points are added to your ATAR. In Victoria, VTAC says the adjustments "are added to your aggregate score, and your new selection rank is calculated using the ATAR conversion table." Your ATAR never moves — the aggregate moves, and the selection rank is re-read from the table. That is why this calculator asks for your aggregate (or looks it up from your ATAR) instead of adding points to your ATAR directly. Our selection rank calculator does the ATAR-level calculation for the other states; it does not give the Victorian result.

VTAC publishes its own worked example of the aggregate path: an ATAR of 70.00 with an aggregate of 120.41, plus 5 Equity Schemes points, gives an aggregate of 125.41 and a selection rank of 73.40. The same example carries the warning that matters most for this calculator: "Equity Schemes points vary by institution and course, meaning your selection rank may be different for each course on your preference list." One ATAR, one SEAS application — and a different selection rank for every course.

Worked examples

VTAC's own example. Aggregate 120.41 (ATAR 70.00) plus 5 Equity Schemes points gives an aggregate of 125.41 and a selection rank of 73.40 — VTAC's figures, quoted as VTAC published them.

The same example through this calculator's table. Aggregate 120.42 (ATAR 70.00) plus 5 points gives an aggregate of 125.42 and a selection rank of 73.44. That is 0.04 above VTAC's 73.40 — the difference is the table's linear interpolation between its published anchors, not an error, and it is smaller than the table's own rounding step.

Starting from an ATAR. An ATAR of 85.00 looks up to an aggregate of 144.45; plus 10 assumed SEAS points gives an aggregate of 154.45 and a selection rank of 89.68.

The 99.95 cap. An aggregate of 205.00 on its own gives a selection rank of 99.78; plus 20 assumed points gives an aggregate of 225.00, which is above the top of the table — so the selection rank is 99.95, capped. No selection rank can be higher than 99.95.

What the calculator assumes — and what it cannot know

The one number this calculator cannot supply is the adjustment itself. VTAC publishes no per-category values, no maxima and no formula, so the honest design is a what-if estimator: you enter the adjustment you are assuming, and it shows the selection rank that adjustment would give. If a university has published its own figure for your course, enter that. RMIT, for example, publishes "up to 20 aggregate points" for its equity adjustments — that is RMIT's own figure, not a VTAC rule, and it is the reason the calculator's input range runs to 20. Other institutions publish their own maxima, and some publish none at all.

Try a range, not a single number. If you do not know what a university will award, run the calculator at 0, at 5 and at 10 points and see which courses each result would clear — that range is a more honest picture of your position than any single guess. And remember the adjustment is per course: the same SEAS application can be worth different amounts at different institutions, so repeat the calculation for each course on your preference list instead of carrying one number across all of them.

Who decides, and what you will not be told

Each institution applies special consideration differently, and VTAC convenes an assessment panel for the applications — but the outcome is not shared with you. VTAC is explicit: "You will not receive notification of your equity schemes application outcome." You will not be told how many points you were awarded, or whether you were awarded any at all. The first you will know is the offer itself — or the absence of one.

That silence is why the estimate-only warning matters. SEAS can also result in no adjustment, and it does not guarantee an offer: you still need to meet the prerequisites, and the cut-off still applies to your selection rank. A course with a cut-off of 90 will not admit an applicant with a selection rank of 75 just because of SEAS — but an applicant with an ATAR of 87 and a strong SEAS claim is a genuinely different case from an applicant with an ATAR of 87 and no claim at all. See our guide on how ATAR cut-offs work for how to read those figures honestly.

Scope: Victoria and VTAC only

This calculator models the VTAC aggregate-to-selection-rank path only. It does not model the equity schemes of other states: in New South Wales, Queensland and Western Australia, adjustment factors are added to your ATAR, not to your aggregate, and South Australia has its own aggregate system through SATAC. If you are applying outside Victoria, use the scheme for that state — UAC runs Educational Access Schemes in New South Wales and the ACT, and QTAC, TISC and SATAC have their own adjustment-factor schemes — and use our selection rank calculator for the ATAR-level states.

Common mistakes

  • Adding SEAS points to your ATAR. In Victoria the points go on your aggregate, not your ATAR. Adding them to your ATAR gives the wrong number — use this calculator, not the ATAR-level one.
  • Treating a category as a fixed number of points. The four categories describe eligibility only. VTAC publishes no point value for any category, and any table claiming otherwise is invented.
  • Using one selection rank for every course. SEAS points vary by institution and course, so your selection rank is different for each course on your preference list — recalculate it per course.
  • Assuming SEAS guarantees entry. SEAS lifts your selection rank; it does not reserve a place. You still need to meet prerequisites, and the cut-off still applies to your selection rank.
  • Expecting to be told the outcome. VTAC does not notify you of your equity schemes application outcome. You will not learn how many points you were awarded — the offer is the first sign.

How we built and checked this

We built this calculator as a what-if estimator on the site's already verified VTAC 2025 aggregate-to-ATAR table — the same 27-anchor table used by our VCE ATAR Calculator, with linear interpolation between anchors and the inverse lookup for ATAR inputs. It adds the adjustment you enter to your aggregate and re-reads the selection rank from the table, capped at 99.95. It contains no SEAS point values of its own, because VTAC publishes none. We checked the arithmetic by hand: VTAC's own example (120.41 + 5 → 125.41 → 73.40) against our table (120.42 + 5 → 125.42 → 73.44, a 0.04 interpolation difference), ATAR 85.00 → aggregate 144.45 → +10 → 154.45 → 89.68, and the cap case 205.00 + 20 → 225.00 → 99.95.

Sources — check the official tables

SEAS categories, evidence and the aggregate rule are set by VTAC and change every year. Check the current details with VTAC: VTAC — ATAR scaling and Equity Schemes example • VTAC — applying for equity schemes • VTAC — equity schemes categories • VTAC — RMIT, up to 20 aggregate points

Related calculators

Estimate your ATAR first with the main ATAR calculator or the VCE ATAR Calculator. For the ATAR-level states, use the Selection Rank Calculator. You can also try the Predicted ATAR Calculator to estimate your ATAR from expected study scores.

Related guides

What Is SEAS? • ATAR vs Selection Rank • University Preferences • What Is a Selection Rank? • ATAR Bonus Points Explained • ATAR Cut-Offs Explained • University Offer Rounds

Last updated: 18 November 2026.

FAQ

SEAS calculator questions

SEAS stands for Special Entry Access Scheme. It is run by VTAC for students applying to Victorian universities whose education was disadvantaged by circumstances beyond their control. The scheme is now also called "equity schemes and scholarships".

VTAC publishes no point values for any SEAS category. Each institution decides how much SEAS is worth for its own courses, so the figure varies by institution and course, and VTAC does not tell you the outcome of your application.

No. SEAS lifts your selection rank, not your ATAR. The adjustment is added to your aggregate, and a new selection rank is calculated from the adjusted aggregate using the ATAR conversion table.

The four categories are: (1) personal information and location, (2) financial hardship, (3) disability or medical condition, and (4) difficult family and life circumstances. The categories carry no points — they describe eligibility only, and no number is attached to any category.

No — not exactly. VTAC publishes no values, so no calculator can tell you what you will get. This calculator is a what-if estimator: enter the adjustment you are assuming and it shows the selection rank that adjustment would give.

No. SEAS can lift your selection rank, but you still need to meet the course prerequisites, and the cut-off still applies to your selection rank. An application can also result in no adjustment at all.

Because SEAS points are added to your VCE aggregate, not to your ATAR. If you know your aggregate, enter it directly; if you only know your ATAR, the calculator looks up the matching aggregate from the VTAC 2025 aggregate-to-ATAR table and works from there.

No. It models the VTAC aggregate-to-selection-rank path only. Other states apply equity adjustments differently — in New South Wales, Queensland and Western Australia they are added to your ATAR — so use the selection rank calculator for those states.