GPA to ATAR Calculator (and ATAR to GPA)

Convert a GPA to an approximate ATAR, or an ATAR back to an approximate GPA, with this free two-way converter. Read this first: there is no official GPA-to-ATAR conversion anywhere, because a GPA is an average of grades and an ATAR is a percentile rank, so no exact conversion exists — this tool gives you indicative bands only, a planning guide, not a precise figure and not a university's own conversion.

GPA to ATAR Converter

Choose a direction, enter a number, and the converter shows the indicative band it falls in. Every result is a band — never a single "exact" value.

4-point GPA mode — read this first. The 4.0 bands are the 7-point bands below rescaled by ×4/7 and rounded to one decimal — they are not a separate official table. No official ATAR↔GPA formula exists; universities convert differently — ask the institution you are applying to how it converts, because its method is the one that counts.

How it works GPA 0–7.0 or 0–4.0 ⇄ ATAR 0–99.95 = Indicative band only

Every result is a band, never a single exact value — and the reverse direction is just as approximate as the forward one. A GPA of 6.0 on the 7-point scale, for example, sits in the indicative ATAR band of 95.00–98.95, which is wide because a rank and an average are built from different inputs.

What is a GPA? What is an ATAR?

A GPA — a grade point average — is the average of your grades at university, usually on a 7-point scale in Australia: 7 is a High Distinction, 6 is a Distinction, 5 is a Credit, 4 is a Pass, and below 4 is a fail. An ATAR is different: it is a percentile rank, reported from 30.00 to 99.95, that says where you sat in your Year 12 age cohort, not what marks you earned. That is the whole problem with converting between them — one number is an average of grades, the other is a position in a ranking, so no formula can turn one into the other exactly.

Why is there no official ATAR to GPA conversion?

An ATAR and a GPA measure different things. An ATAR is a percentile rank: it tells you where you sat in your age cohort, reported from 30.00 to 99.95. A GPA is an average of your grades on a scale — usually 7.0 in Australia, where 7 is a High Distinction, 6 is a Distinction, 5 is a Credit, 4 is a Pass, and below 4 is a fail. You cannot turn a rank into an average with a formula, because the two numbers are built from completely different inputs. That is why no admissions centre publishes an ATAR-to-GPA table, and why any website that shows a single precise conversion — "ATAR 90 = GPA 6.0" — is presenting a guess as a fact. If you want the comparison in full — what each scale is for and why no exact conversion exists — read ATAR vs GPA.

What universities actually do is simpler and messier than a table. When a university needs to compare an ATAR applicant with a GPA applicant — for example, for a graduate-entry course or a transfer — it uses its own internal method, and those methods differ between universities. Some use broad bands, some use their own conversion schedules, and some do not convert at all: they rank applicants within each entry pathway separately. So even the indicative bands on this page are a planning guide, not a number any university has promised to honour.

How do the indicative bands work?

The bands below are a commonly used indicative mapping of ATAR against GPA. They are deliberately wide, because the honest answer to "what GPA is an ATAR of 90?" is a range, not a point. An ATAR in the high 90s sits around a GPA of 6.5 to 7.0; an ATAR around 90 sits around 5.5 to 6.0; an ATAR around 80 sits around 4.5 to 5.0; an ATAR around 70 sits around 3.5 to 4.0. The GPA bands are uniformly 0.5 wide from an ATAR of 50 upwards; only the bottom band — below 50, below a GPA of 2.5 — is wider. In ATAR terms the 60–69.95 band spans ten ATAR points where the bands above it span five, because the relationship between rank and average loosens as you move down the scale.

Use the bands in the direction that matches your question. If you have an ATAR and a course asks for a GPA, the band tells you roughly where you would land. If you have a GPA and want to know what ATAR it is "worth", the band tells you roughly what rank a similar student would have needed. In both directions, treat the result as a starting point for a conversation with the university — not as a guarantee of entry.

The indicative bands

ATARIndicative GPA (7-point scale)
99.00 – 99.956.5 – 7.0
95.00 – 98.956.0 – 6.5
90.00 – 94.955.5 – 6.0
85.00 – 89.955.0 – 5.5
80.00 – 84.954.5 – 5.0
75.00 – 79.954.0 – 4.5
70.00 – 74.953.5 – 4.0
60.00 – 69.953.0 – 3.5
50.00 – 59.952.5 – 3.0
Below 50Below 2.5

These bands are indicative only — a planning guide, not an official table. No admissions centre publishes an ATAR-to-GPA conversion, and universities use their own methods.

The indicative bands on a 4-point scale

The 4-point bands are the 7-point bands above rescaled by ×4/7 and rounded to one decimal — for example, 6.5–7.0 becomes 3.7–4.0 and 5.5–6.0 becomes 3.1–3.4. They are not a separate official table, and the same caveat applies: no official ATAR↔GPA formula exists, and universities convert differently.

ATARIndicative GPA (4-point scale)
99.00 – 99.953.7 – 4.0
95.00 – 98.953.4 – 3.7
90.00 – 94.953.1 – 3.4
85.00 – 89.952.9 – 3.1
80.00 – 84.952.6 – 2.9
75.00 – 79.952.3 – 2.6
70.00 – 74.952.0 – 2.3
60.00 – 69.951.7 – 2.0
50.00 – 59.951.4 – 1.7
Below 50Below 1.4

These bands are indicative only — derived from the 7-point bands by proportional rescale (×4/7), rounded to one decimal. No admissions centre publishes an ATAR-to-GPA conversion on either scale.

Worked examples

An ATAR of 90 falls in the indicative GPA band of 5.5 to 6.0 — roughly a Credit to Distinction average. An ATAR of 99.5 falls in the band of 6.5 to 7.0. Going the other way, a GPA of 6.0 falls in the indicative ATAR band of 95.00–98.95, and a GPA of 4.0 falls in the band of 75.00–79.95. Notice how wide the reverse bands are: that width is the honest answer, not a flaw in the tool. On a 4-point scale, an ATAR of 90 falls in the indicative band of 3.1 to 3.4 — the 7-point band of 5.5 to 6.0 rescaled by ×4/7; a GPA of 3.5 on a 4-point scale falls in the indicative ATAR band of 95.00–98.95. Two more reverse examples: a GPA of 7.0 sits in the indicative ATAR band of 99.00–99.95, and a GPA of 5.0 sits in the band of 85.00–89.95. A GPA exactly on a band edge, such as 6.0, sits in the higher band — 95.00–98.95, not 90.00–94.95.

GPA to ATAR: converting the other way

Most visitors to this page start with a GPA, not an ATAR — for example, a university student comparing their results with school-leaver entry requirements, or an applicant whose course asks for an ATAR equivalent. Choose "GPA → ATAR" in the converter above, pick your scale, and enter your GPA: the tool shows the indicative ATAR band it falls in. A GPA of 6.0 on the 7-point scale sits in the band of 95.00–98.95, a GPA of 4.0 sits in the band of 75.00–79.95, and on a 4-point scale a GPA of 3.5 sits in the band of 95.00–98.95. Notice how wide those reverse bands are: a whole range of ATARs maps to the same GPA, so the band is the honest answer, not a flaw in the tool. And the same warning applies in this direction — there is no official GPA-to-ATAR conversion, so treat the band as a starting point for a conversation with the university, not as a guarantee of entry.

How is a GPA calculated?

A GPA is a credit-weighted average of grade points. Each unit you complete is worth a number of grade points — on the 7-point scale, a High Distinction is 7, a Distinction 6, a Credit 5, a Pass 4, and a fail 0 — and each unit also carries credit points, usually reflecting how big the unit is. Multiply each unit's grade points by its credit points, add those up, and divide by your total credit points: that is your GPA. For example, a 7 in a 10-credit unit and a 5 in another 10-credit unit give (7 × 10 + 5 × 10) ÷ 20 = 6.0. A heavier unit counts more than a lighter one, so the same grades can give a different GPA depending on the credit weighting.

Some GPAs are weighted and some are not. A weighted GPA — the usual Australian method — weights each unit by its credit points, as above; an unweighted GPA treats every unit equally regardless of size. The two methods can give different numbers from the same grades, so if a course asks for your GPA, check which method your university uses before you convert.

WAM vs GPA

A WAM — a weighted average mark — is different again: it is the average of your actual marks out of 100, weighted by credit points, rather than an average of grade points on a 7- or 4-point scale. A WAM of 75 and a GPA of 6.0 can describe the same results, but they are different numbers on different scales, so one cannot simply be read off the other. There is no official WAM-to-ATAR conversion either, and this converter takes a GPA, not a WAM — if your transcript shows a WAM, ask your university how it maps to a GPA before converting.

7-point vs 4-point GPA scales

The 7-point scale is the Australian standard: most Australian universities report GPA out of 7. Some universities use a 4-point scale instead, and this page's 4-point mode covers that case — but note what it is: the Australian 7-point bands rescaled by ×4/7 and rounded to one decimal, not a separate official table. It is also not a US 4.0 GPA: a US GPA is calculated differently, on a different grading system, so a US 4.0 and an Australian 4.0 are not the same result. If your GPA comes from outside Australia, do not use this converter for it — ask the institution you are applying to how it reads your GPA.

When do you actually need a conversion?

Most school leavers never need one. If you are applying to university straight from Year 12, your ATAR is the number that matters, and courses publish their entry requirements as selection ranks — see our guide on how ATAR cut-offs work. Conversions usually come up in three situations: graduate-entry courses that ask for a GPA from applicants who already hold a degree, transfers between universities where one institution wants to compare your record with an ATAR, and overseas study or work where a GPA is the expected format. In all three cases, the institution you are applying to is the authority — ask them how they convert, because their method is the one that counts.

If you are a current university student, your GPA is already the number that matters for most of your next steps — honours, postgraduate coursework, scholarships and graduate programs all look at it directly. Converting it back to an ATAR is mostly useful for curiosity or for comparing yourself with school-leaver entry requirements, and the band is enough for that.

What is a good GPA?

On a 7-point scale, a GPA of 6.0 or above is a Distinction average and is competitive for many postgraduate courses and scholarships; a GPA of 5.0 to 5.9 is a Credit average and is solid for most purposes; a GPA of 4.0 to 4.9 is a Pass average and will meet the minimum for many courses but not the competitive ones. But "good" depends on what you are applying for, just as a "good ATAR" depends on the course — read our guide on what counts as a good ATAR for the same logic applied to ranks. And remember that some universities use a 4-point GPA scale instead of 7 — if your GPA is out of 4, use the 4-point mode in the converter above; its bands are the 7-point bands rescaled by ×4/7 (see the 4-point table), not a separate official table.

Common mistakes

  • Treating a band as an exact conversion. There is no official table, so a single number like "ATAR 90 = GPA 6.0" is a guess. Use the band, and confirm with the university.
  • Using a 4-point GPA in the 7-point mode. Some universities report GPA out of 4. A 3.5 out of 4 is a very different result from a 3.5 out of 7 — check which scale your GPA uses first, and choose the matching mode in the converter.
  • Assuming every university converts the same way. Universities use their own methods, and some do not convert at all. The method of the institution you are applying to is the only one that matters.
  • Converting when you do not need to. School-leaver entry uses ATARs; university progression uses GPAs. Converting between them is usually only needed for graduate entry, transfers, or overseas applications.

How we built and checked this

We built this converter from indicative bands only, because no official ATAR-to-GPA conversion exists to build from. We tested both directions with known inputs — ATAR 90 gives GPA 5.5 to 6.0, ATAR 99.5 gives 6.5 to 7.0, GPA 6.0 gives ATAR 95.00–98.95 — and every result shows a band, never a single precise value. The 4-point mode adds no new data: its bands are the 7-point bands rescaled by ×4/7 and rounded to one decimal, and we checked every rescaled band boundary against that derivation (see the 4-point table).

Sources — check the official tables

There is no official conversion table to link to — that is the point of this page. For the entry requirements that actually decide admission, check the admissions centre for your state: VTAC • UAC • QTAC • TISC • SATAC

Related calculators

Estimate your rank with the main ATAR calculator, the VCE ATAR Calculator, the HSC ATAR Calculator, the QCE ATAR Calculator, the WACE ATAR Calculator or the SACE ATAR Calculator. You can also try the Predicted ATAR Calculator to estimate your ATAR from expected study scores.

Related guides

What Is a Selection Rank? • What Is ATAR? • How Is ATAR Calculated? • IB to ATAR Conversion

Last updated: 18 November 2026.

FAQ

ATAR to GPA questions

Indicatively, an ATAR of 90 sits in the GPA band of about 5.5 to 6.0 on a 7-point scale — roughly a Credit to Distinction average. There is no official conversion, so this is a planning band, not an exact figure.

No. No admissions centre publishes an ATAR-to-GPA table, because a GPA is an average of grades and an ATAR is a percentile rank — they measure different things. Universities that need to compare the two use their own methods.

Each university uses its own method, and some do not convert at all — they rank applicants within each entry pathway separately. If you need a conversion for a specific application, ask the university how it converts, because its method is the one that counts.

Indicatively, a GPA of 6.0 on a 7-point scale sits in the ATAR band of 95.00–98.95. That is a wide band, and it is the honest answer — a GPA and an ATAR are built from different inputs, so the conversion is always approximate.

On a 7-point scale, 6.0 or above is a Distinction average and competitive for many postgraduate courses and scholarships; 5.0 to 5.9 is a Credit average; 4.0 to 4.9 is a Pass average. What counts as good depends on what you are applying for — check the entry requirements of the course you want.

For some pathways, yes — graduate-entry courses, transfers and mature-age entry often use a GPA or other measures instead of an ATAR. Check the entry requirements on the course page: it will say which measure the course accepts.

Not directly with this converter, and there is no official WAM-to-ATAR conversion either. A WAM is a weighted average mark out of 100, while a GPA is an average of grade points — if your transcript shows a WAM, ask your university how it maps to a GPA first, then convert that GPA.

No. The 4-point mode on this page is the Australian 7-point bands rescaled by ×4/7 — it is not a US 4.0 GPA, which is calculated differently. Do not use this converter for a US GPA; ask the institution you are applying to how it reads your GPA.

Indicatively, a GPA of 4.0 on a 7-point scale sits in the ATAR band of 75.00–79.95. That is a wide band, and it is the honest answer — a GPA and an ATAR are built from different inputs, so the conversion is always approximate.

Not exactly. Indicatively, an ATAR of 99.95 sits in the GPA band of 6.5 to 7.0 on a 7-point scale, or 3.7 to 4.0 on a 4-point scale — so 4.0 is the top of the band, not an exact equivalent. There is no official conversion, so treat any single-number claim as a guess.