VCE Study Score Explained: What It Means for ATAR

If you are studying VCE in Victoria, your study scores are the numbers that decide your ATAR. This guide explains what a study score is, how the VCAA works it out from your SACs and exams, and what counts as a good one — on the 0 to 50 scale where 30 is the average.

19 min readGuide

What is a VCE study score?

A VCE study score is a number from 0 to 50 that shows how you performed in one VCE study — one subject — compared with every other student in Victoria who took that study in the same year. It is not a percentage and it is not your exam mark. It is a standardised score that lets VTAC compare students across different studies fairly, so a study score in English can be compared with one in chemistry even though the two subjects are assessed very differently.

The scale is set so that the average study score is 30. That is the mean: a study score of 30 means you performed at the average level for that study in that year. A score above 30 means you did better than average, and a score below 30 means you did worse. Most students score in the twenties or thirties — the VCAA says most study scores fall between 23 and 37. A study score of 40 or above is generally regarded as a strong result, and a score in the mid to high forties is an exceptional one.

Study scores are whole numbers, and you receive one for each VCE study you complete, as long as you meet the requirements for that study. Your study scores appear on your VCE results, and they are the raw material VTAC uses to calculate your ATAR — your ATAR is derived from them, not the other way around. Because the score is relative, the same exam mark can produce different study scores in different years or in different studies: what matters is where your result sits among everyone who took that study in that year.

Who calculates what: VCAA vs VTAC

Two organisations sit behind every VCE study score, and they do different jobs. The VCAA (Victorian Curriculum and Assessment Authority) runs the VCE: it designs each study, sets the SAC requirements, administers the end-of-year exams, moderates school-based assessments, and calculates the raw study score on the 0 to 50 scale. The VTAC (Victorian Tertiary Admissions Centre) takes those raw study scores, scales them, and calculates your ATAR.

A quick way to tell them apart is the decimal point. Whole numbers come from the VCAA — a study score is always a whole number out of 50. Anything with a decimal point comes from VTAC: scaled study scores and the ATAR both have decimal points. So a “34” is a VCAA study score, a “37.42” would be a VTAC scaled score, and a “78.35” is an ATAR.

What goes into a study score?

Your study score is based on your results in the graded assessments (GAs) for that study. In most VCE studies there are three: your Unit 3 school-assessed coursework (SACs), your Unit 4 SACs, and the end-of-year examination. Some studies use school-assessed tasks (SATs) or externally assessed tasks instead of coursework, and some mathematics studies have two examinations rather than one.

Each graded assessment has a weighting — a percentage contribution to your study score — and the split varies by study. The common patterns are:

Study typeUnit 3 SACsUnit 4 SACsExamination(s)
English and EAL25%25%50%
Mathematics studies (Methods, Specialist, General)20%20%60% (two exams)
Most other studiesSACs and exam roughly equal — the exam is about half in most studies

The exact split for your study is in its study design and in the VCAA’s assessment summary, which lists the contribution of every graded assessment for every study. Check your own study there before you plan your year — the exam is worth about half in most studies, but the share varies a lot from study to study.

How is a study score calculated?

The VCAA describes the calculation in four steps. It is a statistical process, done fresh every year for every study — so a study score of 35 in one year is not directly comparable to a study score of 35 in another year in the same study.

1. Standardise each graded assessment

The final score for each graded assessment is standardised: the state mean for that assessment is subtracted from your score, and the result is divided by the state standard deviation. In symbols: standardised score = (final score − state mean) ÷ state standard deviation. This puts every assessment on the same scale, so a mark in a hard-marked assessment can be compared with a mark in a generously marked one.

2. Weight the standardised scores

Each standardised score is multiplied by that assessment’s percentage contribution to the study score. For English, the VCAA gives the formula exactly: (standardised Unit 3 coursework score × 0.25) + (standardised Unit 4 coursework score × 0.25) + (standardised examination score × 0.50). Other studies use their own weightings from the table above.

3. Rank every student in the study

The weighted standardised scores are added up — up to three in a VCE study — and all students in the study are ranked by their total, from highest to lowest. Students with the same total get the group’s highest rank. This is the step that matters most: two students with the same weighted total get the same study score, and a higher score needs a higher position in the state, not a higher raw mark.

4. Place the ranks on the 0 to 50 scale

The ranks are normalised with an inverse normal function, then converted to a scale with a mean of 30 and a standard deviation of 7, truncated at 0 and 50. That is why the average is always 30, why most scores land between 23 and 37, and why the distribution looks the same in every study: about two-thirds of students score within one standard deviation of the mean. The VCAA makes further adjustments for studies with small numbers of students.

What does statistical moderation do to my SAC scores?

Because different schools mark coursework differently, your school-based assessment results are moderated before your study score is calculated. The VCAA aligns the distribution of each school group’s SAC scores in a study with the distribution of the external scores for the same group of students — the external score is built from exam results, in common tasks with common assessors. In studies with two external assessments, both are used, and in a few studies the GAT also feeds into moderation.

Three things follow from how the VCAA describes it. First, your rank inside your school is kept — statistical moderation does not change the relative performance of students within the moderation group, so if you rank first in your school for a study, you stay first after moderation. Second, the numbers can move: if your school’s cohort does well on the exam, its SAC scores are aligned with that stronger distribution, and if the cohort does less well, they are aligned downwards. Third, each school is one group — for a VCE study the moderation group is the cohort of students at your school taking that study, or the combined cohort if schools combine for assessment.

That is why your SAC rank matters more than your SAC mark. A high SAC mark at a school that marks generously is worth less than the same mark at a school that marks hard, because the exam sets the level for everyone. The exam also does double duty: it is a graded assessment in its own right, and it is the benchmark your school’s SAC scores are aligned to.

What do the letter grades on my results mean?

As well as a study score, your Statement of Results shows a letter grade for each graded assessment in the study. The scale runs A+, A, B+, B, C+, C, D+, D, E, then two non-grades: UG (ungraded) means the score was too low to assign a grade, and NA (not assessed) means a school-based assessment was not submitted or the exam was not sat. A scored VCE study shows three grades; a scored VCE VET study shows two.

Here is the point students most often get wrong: there is no table that turns a set of letter grades into a study score, and no grade guarantees a particular score. The VCAA sets the minimum score for each grade separately for each assessment — for school-based assessments after statistical moderation, and for external assessments when marking is complete — so the same raw mark can earn a different letter in different assessments or years. And the study score itself is built from your assessment scores, not from the letters: the four steps above start from each graded assessment’s final score. The letters report your level of performance in each assessment; the study score ranks your combined result against the whole state.

What is a good study score?

There is no single definition of a good study score, because it depends on your goals. A course with a high selection rank needs high study scores across your subjects; a course with a lower selection rank needs more modest scores. What the VCAA distribution does give you is an exact sense of where any score sits. The VCAA publishes this approximate distribution for study scores:

Study scoreStudents on or above it (approx.)What it means
50about 0.3%The maximum — the rarest result in any study
45about 2%Exceptional — top 2% of the study
40about 9%Strong — top 9% of the study
35about 26%Above average — top quarter of the study
30about 53%The state average — the middle of the study
25about 78%Below the average, but well within the middle range
20about 93%A study score below 20 is reported to you as “<20”

Two readings of that table are worth remembering. First, a 30 is not a bare pass: it is the middle of the state in that subject, and six study scores of 30 are a solid, average-across-the-board result. Second, what matters more than any single score is the combination. Your ATAR is built from your best study scores, so one very high score cannot rescue several weak ones, and one weak score will not ruin your ATAR if your other scores are strong. Consistency across your subjects usually counts for more than a single standout result.

Raw study score vs scaled study score

Your raw study score is the 0 to 50 score the VCAA sets from your moderated, weighted result — it is a rank within one study, on the scale with a mean of 30 and a standard deviation of 7. Your scaled study score is what VTAC produces from that raw score: it adjusts the score for the strength of the cohort in that study, so that scores from different studies can be compared fairly. It is the scaled scores, not the raw ones, that go into your ATAR aggregate.

That distinction has one surprising consequence: a scaled study score can go above 50, even though a raw study score never can. In 2025, a study score of 50 in Specialist Mathematics scaled to 55, and Latin had the highest scaled mean in Victoria at 45.0. A raw 38 in one subject and a raw 38 in another are therefore not the same achievement — compare scaled scores, not raw scores, across subjects. For the full explanation, see our guide to how ATAR scaling works, and try the Subject Scaling Calculator to see what scaling does to a score. Source: VTAC 2025 Scaling Report (PDF).

How do study scores feed into your ATAR?

Your study scores do not become your ATAR directly. First, VTAC scales each study score using the VCAA scaling report for the year, adjusting for the strength of the cohort that took the study so scores in different studies can be compared fairly. Scaling is recalculated every year, and the scaled scores — not your raw study scores — are what feed into your ATAR.

Once your study scores are scaled, VTAC combines them into an aggregate: your best four scaled study scores, plus ten percent of your fifth and sixth scaled study scores if you have them. English is a special case — a study score in one of the English studies must be included in your best four, so English always counts towards your ATAR in Victoria.

The aggregate is then converted into your ATAR, which is a percentile rank from 30.00 to 99.95. The conversion depends on how the whole year’s cohort performed, so the same aggregate can produce a slightly different ATAR in different years. You can estimate your ATAR from your study scores with the VCE ATAR Calculator or the Study Score Calculator — remember that every calculator result on this site is an ESTIMATE ONLY.

When do you get no study score?

Not every Unit 3–4 study produces a study score. Under the VCAA rules, you get no study score if any of these apply:

  • VCE Vocational Major studies. They have no scored assessment, give no study score, and cannot count towards an ATAR.
  • Fewer than two graded assessments. You need at least two graded assessments in the study and an S for both Units 3 and 4 in the same academic year. Students with Interrupted Studies status can meet this over two academic years, using their best result for each graded assessment across those years.
  • Units 3 and 4 not satisfactorily completed. If more than one graded assessment is recorded as NA, or Units 3 and 4 were not satisfactorily completed, the result is reported as UN and no study score is calculated.
  • A study done without scored assessment. You can complete VCE units, and still be assessed for satisfactory completion, without a score being provided to the VCAA — in that case all graded assessments are entered as NA and no study score is calculated.

Scored VCE VET studies work the same way with two graded assessments — the SAC and a VCAA exam — instead of three. A subject shown without a study score on your results usually means one of the requirements above was missing, not that your score was too low to print.

What if you miss an exam?

A missed exam is not a zero. If illness, injury or personal trauma affects you before or during an exam — including preventing you from attending — you can apply for a Derived Examination Score (DES) through your school, with independent evidence, by the closing date for that study; you cannot apply once final results are released. The VCAA calculates the DES statistically from your moderated school-based assessments, GAT component scores, any other exam scores in the study and the indicative grade your school submitted — and uses whichever is higher, the DES or the exam score you actually achieved. If you have three exams on one day, you automatically receive a DES for the third exam, provided you attend all three, attempt the questions to the best of your ability, have completed the course of study and have a result for at least one other graded assessment in that study.

The General Achievement Test (GAT) is part of the same safety net. Every student enrolled in at least one Unit 3–4 study sits the GAT in June. It does not count directly towards your study score — the VCAA uses it to check that school-based and external assessments have been accurately assessed, as one input to statistical moderation in a few studies, and in calculating Derived Examination Scores. If your exam score comes out far below what your school assessments, other exams and GAT scores predict, the VCAA has the paper assessed again; that check can raise your score or leave it unchanged, never lower it.

How can I improve my study scores?

The most reliable way to lift a study score is to improve your performance in the assessments that count towards it, especially the examination. Examinations carry a large share of the weight in most studies, and they also drive the moderation of your school-based assessments, so strong exam preparation helps twice. Past examination papers, the VCAA examination reports and the study design for each subject are the best preparation materials available.

Consistency matters as well. School-based assessments are spread across the year, and each one contributes to your final result, so a steady effort usually beats a last-minute push. And focus on your rank, not just your marks: moderation keeps your rank inside your school, so consistent performance across the year protects the thing that is kept. If you are struggling in a subject, ask your teacher for help early — they can tell you which assessment criteria you are missing. And if your English result is holding you back, give it extra attention, because it must count in your best four.

Common mistakes

  • Confusing a study score with a percentage. A study score of 35 is not 35 percent. It is a standardised score on a 0 to 50 scale where 30 is the average.
  • Thinking a letter grade predicts your study score. Grades report each graded assessment separately, and the VCAA sets each grade’s cut-off per assessment. No set of grades converts to a study score — the score comes from your ranked, weighted result against the whole state.
  • Ignoring English. An English study must be included in your best four scaled study scores, so a weak English result can hold back your ATAR even if your other subjects are strong.
  • Using last year’s scaling. Scaling is recalculated every year, so your scaled study scores depend on this year’s cohort. Check the current year’s scaling report.
  • Chasing one standout score. Your ATAR is built from your best four study scores, so consistency across your subjects usually counts for more than a single high score.
  • Comparing raw scores across subjects. A raw 38 in Specialist Mathematics and a raw 38 in Psychology are not the same achievement once scaling applies. Compare scaled scores, not raw ones.

Sources — check the official tables

VCAA — Score aggregation (how study scores are calculated, statistical moderation, final grades) • VCAA • VTAC 2025 Scaling Report (PDF) (scaled scores, including Specialist Mathematics 50 → 55 and Latin scaled mean 45.0) • VTAC

Related calculators

Estimate your rank with the VCE ATAR Calculator and work out what your scores mean with the Study Score Calculator. To understand how scaling changes your scores, read our guide to how ATAR scaling works and try the Subject Scaling Calculator. Remember that every calculator result on this site is an ESTIMATE ONLY — your real ATAR is calculated by VTAC from your scaled study scores.

Related guides

How ATAR scaling works • How is ATAR calculated? • What is a good ATAR? • What is the average ATAR?

Last updated: 18 November 2026.

FAQ

Study score questions

A VCE study score is a number from 0 to 50 that shows how you performed in one VCE study compared with every other student in Victoria who took that study in the same year. The average study score is 30, and a score of 40 or above is generally regarded as strong.

A study score of 30 is average, a score of 35 puts you in roughly the top 26% of the study, a score of 40 or above puts you in roughly the top 9%, and a score of 45 or above puts you in roughly the top 2%. What counts as good depends on the course you are aiming for, so check the selection rank for that course.

VTAC scales each study score using the VCAA scaling report for the year, then combines your best four scaled study scores plus ten percent of your fifth and sixth into an aggregate. That aggregate is converted into your ATAR. An English study must be included in your best four.

No. A study score is a standardised score on a 0 to 50 scale, not a percentage. It ranks your performance against other students in the same study in the same year, with 30 as the average.

No. Your raw study score is the 0 to 50 score VCAA sets from your moderated results in one study. Your scaled study score is VTAC's adjustment of that score for the strength of the study's cohort, and it is the scaled scores that go into your ATAR aggregate. A scaled score can go above 50 — in 2025, a study score of 50 in Specialist Mathematics scaled to 55.

No. Letter grades from A+ to E (plus UG and NA) report your level of performance in each graded assessment separately, and the VCAA sets each grade's cut-off per assessment. Your study score is built from your assessment scores, not from the letters — there is no table that turns a set of grades into a study score.

A missed exam is not a zero. If illness, injury or personal trauma affects you before or during an exam, apply for a Derived Examination Score (DES) through your school, with independent evidence, by the closing date for that study. The VCAA calculates the DES statistically from your moderated school-based assessments, GAT scores, other exam scores and your school's indicative grade, and uses whichever is higher — the DES or the score you actually achieved.

Only as a range, not an exact number. A study score is a rank against every student in the state who took that study, so no calculator can know it until the VCAA has every student's results. Our Study Score Calculator estimates the score your SAC and exam percentages point to, with a planning range of about plus or minus 3 points — use it to see what lifting your rank or exam mark could do, not as a promise.