How Is ATAR Calculated? A Simple Australian Guide

ATAR is not worked out by adding up your exam marks. It is built in three steps — scaling, aggregation, and ranking — and each state applies its own rules, so any online result is only an estimate.

13 min readGuide

The three steps, in brief

Every ATAR in Australia is produced the same way, no matter which state you are in. First, your subject results are scaled, so results in different subjects can be compared fairly. Second, your best scaled results are combined into a single total called an aggregate. Third, that aggregate is turned into a percentile rank — your ATAR. The details of each step differ by state, but the shape of the process is the same everywhere.

Understanding the three steps matters, because each one answers a different question students ask. Scaling answers “why did my mark change?” Aggregation answers “which subjects counted?” Ranking answers “why is my ATAR not my average mark?” Take them one at a time and the whole system makes sense.

Step 1: Scaling — making subjects comparable

Scaling is the adjustment applied to each subject’s results before they are combined. It exists because subjects are not equally difficult in the way that matters for comparison: the students who take one subject may be, on average, much stronger overall than the students who take another. Without scaling, a good result in a subject taken by a weaker cohort would count for more than the same standard of work in a subject taken by a stronger cohort, and the comparison would be unfair.

Here is how it works. For each subject, the admissions centre looks at how the students who took that subject performed in their other subjects. If those students did very well overall, the subject is judged to have a strong cohort, and results in it are scaled up. If those students did less well overall, the subject is scaled down. The size of the adjustment depends on the cohort, not on the subject itself — scaling is a property of the year’s students, not a fixed property of the subject.

That last point is the one most students miss. Scaling is recalculated every year from that year’s cohort, so the same raw result in the same subject can scale differently in different years. A subject that scaled up last year may scale down this year. For that reason, the only reliable scaling figures are the ones in the official scaling report for your state and your year — VTAC publishes one for Victoria, UAC for New South Wales, and the equivalent bodies publish theirs in the other states. Never plan around a scaling figure you remember from a previous year.

Advanced mathematics and science subjects are the classic example of scaling in action: strong results in them often scale well, which is one reason competitive degrees such as engineering ask for those subjects as prerequisites. Our guide on the ATAR needed for engineering explains how the maths prerequisite and scaling interact.

Step 2: Aggregation — combining your best results

Once your subjects are scaled, your best results are combined into one total, the aggregate. This is the number that actually gets ranked. Which subjects count, and how many of them, is decided by your state’s rules — and the rules are not the same everywhere.

In most states, a set number of your best subjects counts in full, and then one or two further subjects count as a fraction of their scaled result. English — or the state’s equivalent compulsory English subject — is usually required to be one of the subjects that counts, although the exact rule varies. Some states also have rules about how many subjects from the same area can count, or about prerequisite subjects for particular courses. The ACT works differently again — its aggregate is the best three scaled majors plus 0.6 of the next best course, as our ACT ATAR calculator explains.

Because the aggregation rules are state-specific, do not apply one state’s rules to another state’s results. If you want the exact rules for your state, they are published by your admissions centre: VTAC in Victoria, UAC in New South Wales and the ACT, QTAC in Queensland, TISC in Western Australia, and SATAC in South Australia and the Northern Territory.

A worked example, from our predicted ATAR calculator: six Victorian scaled scores — 40, 38, 36, 34, 32 and 30 — give an aggregate of 154.20 (the best four in full, plus 10% of 32 and 10% of 30), which the calculator estimates at an ATAR of about 89.58. The official 2025 VTAC table gives 89.60 for the same aggregate — the 0.02 difference is the calculator interpolating between the table’s anchor points, and the largest such gap we found anywhere in the table is about 0.19 ATAR points. Every result on this site is shown with a ±2 planning range.

Step 3: Ranking — from aggregate to ATAR

The final step turns your aggregate into your ATAR. Every eligible student’s aggregate is placed in order, from highest to lowest, and your position in that ordering becomes your percentile rank. If your aggregate sits above 80 per cent of the age cohort, your ATAR is 80.00. If it sits above 99 per cent, your ATAR is around 99.00, and so on.

Note the comparison group: the ranking compares you with the whole age cohort, not only with the students who received an ATAR. That is why the middle of the ATAR scale does not sit where many people expect it to — not every student in the cohort receives an ATAR, so the students who do receive one are, on average, above the middle of the whole cohort. We explain this in more detail in our guide to the average ATAR in Australia.

Once you have an ATAR, you may want to see where it sits on the other scale students meet at university — see our guide to converting an ATAR to a GPA, which explains why there is no exact conversion and gives the indicative bands instead.

How does ATAR work in each state?

The three steps are the same everywhere, but the inputs differ. In short:

StateSystemHow the aggregate is built
VictoriaVCEBest four scaled study scores, plus 10% of a fifth and sixth — see the VCE ATAR Calculator
New South WalesHSCBest 10 units, including English — see the HSC ATAR Calculator
QueenslandQCEBest five scaled General subjects — English counts only if it is among the best five — see the QCE ATAR Calculator
Western AustraliaWACEBest four scaled course scores (TEA), plus 10% bonuses for LOTE, Methods and Specialist — maximum TEA 430 — see the WACE ATAR Calculator
South AustraliaSACEBest 90 credits of scaled Stage 2 results, worked out credit by credit — see the SACE ATAR Calculator
ACTBSSSBest three scaled majors, plus 0.6 of the next best course — see the ACT ATAR Calculator
TasmaniaTCEBest five Level 3 or 4 courses over two years — a TE Score of 60 to 75 points — see our guide to what an ATAR is

In Victoria, students complete the VCE, receive study scores out of 50 for each study, and VTAC scales those scores and combines them under Victorian rules. Our VCE ATAR Calculator estimates the result from scaled study scores.

In New South Wales, students complete the HSC, receive marks out of 100, and UAC scales those marks and combines them under New South Wales rules. Our HSC ATAR Calculator estimates the result from scaled HSC marks.

In Queensland, students complete the QCE system, and QTAC calculates the ATAR from the relevant subject results under Queensland rules. Our QCE ATAR Calculator gives an estimate for Queensland students.

In Western Australia, students complete the WACE, and TISC calculates the ATAR under Western Australian rules. Our WACE ATAR Calculator covers Western Australia, and our WACE ATAR Explained guide covers how your TEA is built and converted into an ATAR. In South Australia, students complete the SACE, and SATAC calculates the ATAR under South Australian rules — see our SACE ATAR Calculator.

Students who complete the International Baccalaureate follow a different route again: there is no state calculation for them, because the IB result is converted into an equivalent rank by the admissions centres. Our guide on IB to ATAR conversion explains the official table.

Worked examples — what each aggregate needed in 2025

These are the examples our own calculators produce, checked against the official tables for 2025. They show the same three steps working in every state — and how far apart the aggregates are.

StateAggregate in the exampleEstimated ATARWhat the official table says
Victoria (VCE)154.2089.58VTAC’s 2025 table gives 89.60 for the same aggregate
New South Wales (HSC)370.00About 90.00UAC Table A9 2025: an aggregate of 370.7 was needed for 90.00
Queensland (QCE)421 out of 50092.63QTAC publishes no TEA-to-ATAR table — the final step is a fitted model, labelled as such
Western Australia (WACE)TEA 32597.25TISC’s 2025 table anchor: TEA 325 gives 97.25
South Australia (SACE)72.0084.90SATAC’s 2025 grid: 72.00 gives exactly 84.90
ACT (BSSS)288.00 out of 37892.67BSSS publishes no aggregate-to-ATAR table — a simplified planning model, labelled as such

How accurate is an online ATAR estimate?

It depends on the state, because it depends on what the official body publishes. In Victoria the calculator interpolates between 25 anchor points taken from VTAC’s 1,400-row 2025 table, and the largest gap we found between the interpolation and the official table is about 0.19 ATAR points. In South Australia the calculator looks the aggregate up in SATAC’s full 1,801-row grid, so the table step is exact. In Western Australia it interpolates between 11 anchors from TISC’s published table. In Queensland the final step is fitted from QTAC’s published data, because QTAC publishes no TEA-to-ATAR table. In the ACT the whole aggregate-to-ATAR step is a simplified planning model, because BSSS publishes no such table.

New South Wales is the honest exception. The HSC calculator uses an approximate planning model, not UAC’s official table: for ATARs of 85–99.95 it is within about 0.7 points, but it can be off by 5–37 points lower down — the worst gap we found against UAC’s Table A9 2025 is 0.68 points at an aggregate of 400, inside the accurate band, and up to about 37 points at the low end. A low-end HSC result is a rough guide only. Every calculator on this site shows its result with a ±2 planning range, and every result is an estimate — the official ATAR is the one your admissions centre issues.

ATAR vs selection rank — don’t mix them up

Adjustment factors — the points universities add for equity schemes, subject results, or location — raise your selection rank, not your ATAR. Your ATAR never changes: it is the rank your aggregate earned. The factors are applied on top of it, separately, for each course you apply for, and the university compares your selection rank — not your raw ATAR — against its cut-off.

VTAC puts the mechanism plainly: equity adjustments are “added to your aggregate score, and your new selection rank is calculated using the ATAR conversion table.” Its own example makes the distinction concrete: an ATAR of 70.00 from an aggregate of 120.41, plus 5 equity points, gives an aggregate of 125.41 and a selection rank of 73.40 — while the ATAR stays 70.00. Our selection rank calculator works the same way, and our guide to ATAR vs selection rank explains the difference in full.

Why is my ATAR lower than my marks?

Because an ATAR is a rank, not an average. Your marks say how you did in each subject; your ATAR says where your aggregate sits among everyone in your age cohort. Two students with the same average mark can get very different ATARs if their subjects scaled differently, if different subjects counted, or if one sat in a stronger cohort year. A high average in subjects that scaled down can produce a lower ATAR than a slightly lower average in subjects that scaled up — which is why comparing your ATAR with your percentage marks will always feel wrong. We explain the cohort effect in more detail in our guide to the average ATAR in Australia.

What if you don’t get an ATAR?

Not every student who finishes Year 12 receives an ATAR — each state has its own eligibility rules, and some students do not meet them. That does not end your path to university. Early entry schemes assess you on your school results before ATARs are released, mature-age entry exists for students who left school and came back later, and many courses admit students with a lower ATAR than the published cut-off suggests, or through a diploma or TAFE pathway first. Our guides to early entry, mature-age entry and low ATAR options explain each route, and our guide to whether the ATAR matters looks at how much weight it really carries.

Common myths about how ATAR is calculated

Myth 1: “My ATAR is a percentage.” No — it is a percentile rank from 30.00 to 99.95. An ATAR of 80.00 does not mean you scored 80%; it means your aggregate sat above 80 per cent of your age cohort.

Myth 2: “Bonus points raise my ATAR.” No — adjustment factors raise your selection rank, never your ATAR. The ATAR your aggregate earned is fixed; the factors are applied separately for each course.

Myth 3: “Picking high-scaling subjects guarantees a better ATAR.” No — scaling reflects the strength of the year’s cohort, and it is recalculated every year. A subject that scaled up last year can scale down this year, and a strong result in a subject that scales down still counts — what matters is how you do relative to the cohort, not the subject’s name. Our guide to subject scaling explains this in full.

Myth 4: “The ATAR is calculated the same way in every state.” The three steps are the same, but the rules are not — Victoria counts its best four plus 10% of two more, New South Wales counts its best 10 units, Queensland its best five, Western Australia its best four plus bonuses, South Australia its best 90 credits, and the ACT its best three majors plus 0.6 of the next course. Use the calculator and the rules for your own state.

When are ATARs released?

For 2026 results: in Victoria, VCE results and ATARs are released at 7am on Thursday 10 December 2026 (VTAC). In New South Wales, HSC results and ATARs come out on Wednesday 16 December 2026, with ATARs from 9am (UAC). In Queensland, ATARs are released on Friday 18 December 2026 (QTAC — no release time published). For South Australia, Western Australia and Tasmania, check SATAC, TISC and TASC / the University of Tasmania — those dates are not listed here because they were not verified from an official source for this guide.

Why do online calculators only give an estimate?

Every ATAR calculator on the internet — including the ones on this site — gives an estimate only, and it is important to understand why. The official calculation uses the actual scaling for your year, which is only published after results are released, and it uses the actual cohort’s aggregates to build the ranking. A calculator cannot know either of those things in advance, so it has to use approximations: assumed scaling, and a typical relationship between aggregates and ranks drawn from previous years.

Sources — check the official tables

VTAC — Aggregate to ATAR Table 2025 (PDF) • UAC — Scaling Report 2025, Table A9 (PDF) • QTAC — ATAR Report 2025 (PDF) • TISC — TEA to ATAR table (PDF) • SATAC — University Aggregate to ATAR 2025 (PDF)

Related calculators

Estimate your own result with the VCE ATAR Calculator, the HSC ATAR Calculator, the QCE ATAR Calculator, the WACE ATAR Calculator, or the SACE ATAR Calculator. You can also read our guide to subject scaling for more on how scaling works. Every calculator result on this site is an estimate only.

Related guides

Start with what an ATAR is, then read the average ATAR, ATAR vs selection rank, IB to ATAR conversion and how to improve your ATAR.

Last updated: 18 November 2026.

FAQ

ATAR calculation questions

ATAR is calculated in three steps: your subject results are scaled so different subjects can be compared fairly, your best scaled results are combined into an aggregate, and that aggregate is turned into a percentile rank against your age cohort. Your state’s admissions centre — VTAC, UAC, QTAC, TISC or SATAC — does the official calculation.

The three steps — scaling, aggregation and ranking — are the same everywhere, but the details differ. Each state has its own subjects, its own scaling report and its own rules for which subjects count. Always use the calculator and the rules for your own state.

In NSW, UAC scales your HSC marks, combines your best scaled results into an aggregate under NSW rules, and turns that aggregate into a percentile rank. Our HSC ATAR Calculator gives an estimate from scaled HSC marks — the official result comes from UAC.

In Queensland, QTAC calculates the ATAR from your QCE subject results, applying Queensland scaling and aggregation rules. Our QCE ATAR Calculator gives an estimate — the official result comes from QTAC.

The official calculation uses the actual scaling for your year, published only after results are released, and the actual cohort’s aggregates to build the ranking. A calculator has to use approximations for both, so its result is a guide, not your official ATAR.

The highest ATAR is 99.95. Below 30.00, results are reported as “30 or less” rather than as a number — the ATAR scale runs from 30.00 to 99.95, in steps of 0.05.

No. Adjustment factors — sometimes still called bonus points — change your selection rank, not your ATAR. Your ATAR is fixed by your aggregate; the factors are added separately for each course you apply for.

Yes, as an estimate. Enter your expected scaled scores in the calculator for your state and it will estimate your ATAR — but the official calculation needs the actual scaling for your year, which is only published after results are released.

Yes. An ATAR is a national rank, so an 85.00 earned in one state means the same as an 85.00 earned in another — that is why the same cut-offs can apply across states. What differs is how each state builds the aggregate that the rank comes from.