What ATAR do you need for engineering in Australia?
There is no national figure. At the most competitive engineering schools, the published selection ranks sit in the mid-90s, while the same degree at other universities asks for considerably less — and the specialisation matters as much as the university. The ATAR you "need" is the figure for your target university and your exact specialisation, not the lowest number in the country and not a national average.
Two published examples show how wide the range is. UNSW Sydney lists a 2026 lowest selection rank of 95.0 for its Bachelor of Engineering (Honours) (Mechanical Engineering), with a lowest ATAR of 80.5 admitted in the same intake. The University of Western Australia publishes a 2026 table for its Bachelor of Engineering (Honours) showing a lowest ATAR of 71.30, a lowest selection rank of 80.00 and a median ATAR of 95.20 — and UWA states that for most courses, satisfying the ATAR requirement guarantees entry, with a general eligibility floor of ATAR 75 for Australian Year 12 applicants.
That is why this page publishes no cut-off table. Every number in such a table is last year's figure for one course at one university, and the figures move every year with demand. What matters is knowing how to read the figure for the course you actually want — the next sections explain the different numbers you will see — and then checking that figure on the university's own course page and your state's admissions centre. Any site that states one ATAR for engineering as though it were fixed everywhere is simplifying away the only thing that matters, which is the published figure for the exact course and year.
Why is there no single ATAR for engineering?
Engineering is not one degree — it is a family of degrees. Civil, mechanical, electrical, chemical, software, biomedical, aerospace, mining and environmental engineering are all separate specialisations, and each one has its own entry requirements. A popular specialisation at a prestigious university can ask for a much higher rank than a less popular one at the same school, and the same specialisation can ask for very different ranks at different universities. Regional universities and those with larger intakes generally ask for lower ranks than the most competitive metropolitan schools.
Those ranks are re-set every year by supply and demand. What universities publish is the lowest selection rank that received an offer — the last person in, not a target the university chose in advance — so the figure goes up when a specialisation is popular and down when it is not. A rank that was enough last year may not be enough this year, and any page that quotes one ATAR for engineering as if it applied to every specialisation at every university is not giving you a usable number. The only figures worth planning around are the published ones for the specific course and intake.
What the published figures actually mean
Universities and admissions centres publish several different numbers, and they do not mean the same thing. The three terms to tell apart are:
- Lowest selection rank. The lowest rank — ATAR plus any adjustment factors — that received an offer in the last intake. This is the number most courses publish, and it is the one to compare your own selection rank against.
- Lowest ATAR. The lowest ATAR before adjustment factors that received an offer. It is usually well below the lowest selection rank, because the student who got in on it had adjustment factors on top.
- Median ATAR. The middle ATAR of the students admitted. It shows what a typical entrant actually had, which is often far above the lowest figure.
UWA's 2026 table for its Bachelor of Engineering (Honours) shows the gap in one row: a lowest ATAR of 71.30, a lowest selection rank of 80.00 and a median ATAR of 95.20. The student admitted on 71.30 had adjustment factors lifting them to 80.00, while half the cohort arrived with an ATAR above 95.20. Some universities also publish a guaranteed-entry figure: UWA states that for most courses, satisfying the ATAR requirement guarantees entry, so meeting the published requirement there is a promise, not just last year's result.
A lowest selection rank is not a median or a typical entry rank — the last person in may have had adjustment factors or entered through a special pathway, and the figure moves every year. Use the latest year's data, check several universities, and treat the numbers as a rough guide, not a guarantee.
What ATAR do you need for each engineering specialisation?
Specialisations do not sit at the same level, and the order changes from year to year with demand and intake size. At UNSW, the 2026 lowest selection ranks across the engineering streams sit within a single point of each other — 94 to 95 — which shows how tight the top end is at one university, while other universities spread much wider. The sections below describe each specialisation and the figures that are published for it; always check the exact stream on the university's own course page, because a "Bachelor of Engineering (Honours)" with a flexible first year and a named stream can publish different figures at the same university.
Civil engineering
Civil engineering carries the broadest career pathway in the discipline — structural, transport, water, geotechnical and construction management — which is why intake volumes are larger and most universities run a dedicated civil major. UNSW lists a 2026 lowest selection rank of 94 for its Bachelor of Engineering (Honours) (Civil), and its Gateway Admission Pathway lists an adjusted ATAR of 80 for eligible students for 2027 entry. Civil is usually among the more accessible specialisations at the most competitive universities, but that is a statement about demand, not about the degree: the accreditation is the same.
Mechanical engineering
Mechanical is the second-largest discipline by intake after civil and tends to attract students who like applied physics, mechanics, dynamics and design. UNSW lists a 2026 lowest selection rank of 95.0 for its Bachelor of Engineering (Honours) (Mechanical Engineering), with a lowest ATAR of 80.5 admitted in the same intake, and its Gateway Admission Pathway lists an adjusted ATAR of 81 for eligible students for 2027 entry. The 14.5-point gap between the lowest ATAR and the lowest selection rank is adjustment factors at work — the subject is covered in detail below.
Electrical and software engineering
Electrical and software sit at the competitive end of the discipline. UNSW lists a 2026 lowest selection rank of 94 for both its Bachelor of Engineering (Honours) (Computer) and its Bachelor of Engineering (Honours) (Software), with a Gateway adjusted ATAR of 80 for eligible students for 2027 entry. Software demand has pulled its cut-offs up with computer-science demand, and both streams are accredited by Engineers Australia at UNSW — software additionally by the Australian Computer Society. If you are weighing software engineering against a computer science degree, our guide on the ATAR needed for computer science follows the same method.
Chemical and biomedical engineering
Chemical engineering usually sits below the most competitive streams at a given university: UNSW lists a 2026 lowest selection rank of 94 for its Bachelor of Engineering (Honours) (Chemical/Chemical Product Engineering), with a Gateway adjusted ATAR of 80 for eligible students for 2027 entry. Biomedical is the smaller-intake stream and is often the hardest to enter, but it carries a warning worth checking: at UNSW, biomedical engineering is listed as seeking accreditation with Engineers Australia, not yet fully accredited, while most other specialisations are fully accredited and recognised internationally through the Washington Accord. Before choosing any stream, check the accreditation status of that exact specialisation on the university's course page — accreditation is what employers and registration bodies look for, and it is not identical across streams.
Should you take Specialist Maths or Mathematical Methods for engineering?
Mathematical Methods is required at most Australian engineering schools; Specialist Mathematics is recommended. The hard prerequisite across the universities that publish one is Methods (or its NSW equivalent, HSC Mathematics Advanced plus Extension 1), while Specialist (or HSC Mathematics Extension 2) is listed as recommended or assumed knowledge — meaning the curriculum assumes you have done it, but you can still enrol without it. Students who skip Specialist tend to find first-year engineering maths harder, particularly the differential-equations, vector-calculus and linear-algebra units that underpin every specialisation.
One university's rules show exactly how this works. The University of Western Australia's combined Bachelor of Engineering (Honours) / Bachelor of Science requires an ATAR of at least 80, plus a scaled mark of at least 50% in ATAR Mathematics Methods and at least 50% in one of ATAR Mathematics Specialist, Physics or Chemistry. Students who have not completed the recommended subjects can take bridging units in first year — UWA names Mathematics Foundations: Methods, Mathematics Foundations: Specialist, a Physics Bridging Unit and an Introductory Chemistry unit for exactly this purpose.
Physics is the second subject that matters. UWA requires it as one of the options above, and most other engineering schools list it as recommended assumed knowledge. Chemistry is the relevant science for chemical engineering streams. If you are choosing subjects now, our guide on how ATAR scaling works explains why advanced maths and science subjects often scale well — and a strong mark in them can also add adjustment-factor points to your selection rank.
How far can adjustment factors move the number?
Further than most students expect. Your selection rank is your ATAR plus any adjustment factors you qualify for, and universities compare that selection rank — not your raw ATAR — against their cut-offs. The gap between the two numbers can be more than ten points, and the published figures show exactly how that works: UNSW's Bachelor of Engineering (Honours) (Mechanical Engineering) lists a 2026 lowest selection rank of 95.0, but the lowest ATAR to which an offer was made in the same intake was 80.5. At UWA, the Bachelor of Engineering (Honours) shows a lowest ATAR of 71.30 against a lowest selection rank of 80.00.
The schemes behind that gap are the subject bonuses, equity schemes and regional schemes run by each university and admissions centre — for subjects you studied, for living regionally or remotely, for educational disadvantage, or through a school scheme such as SEAS in Victoria. UNSW's Gateway Admission Pathway makes the same point from the other side: for 2027 entry it lists an adjusted ATAR of 80 for Civil, Computer, Software, Chemical and Biomedical engineering, and 81 for Mechanical and Flexible First Year, against 2026 lowest selection ranks of 94–95. At UNSW, a cumulative maximum of 10 adjustment-factor points can be used toward 2027 admission. Find out what adjustment factors you qualify for before deciding a course is beyond you; the raw ATAR is only the starting point. Our guide on how ATAR cut-offs work walks through selection ranks and adjustment factors step by step.
Honours, combined and flexible degrees
Most engineering degrees in Australia are now four-year Bachelor of Engineering (Honours) programs, accredited by Engineers Australia. The honours year is built into the degree, so you graduate with honours without applying separately. Many universities also offer combined degrees — engineering with commerce, science, law or arts — which usually ask for a higher rank than the single degree because they attract a different applicant pool. UNSW's own figures show the pattern: its Bachelor of Engineering (Honours) / Commerce lists a 2026 lowest selection rank of 97.0, against 95.0 for the single Mechanical degree. And a growing number of schools offer flexible first-year engineering, where you study a common first year and choose your specialisation in second year. Flexible entry can be a smart choice if you are not sure which specialisation suits you, and it often asks for a lower rank than the most popular specialisations at the same university.
There is also the three-year Bachelor of Engineering Science or Bachelor of Engineering Technology at some universities, followed by a masters to reach full professional accreditation. These pathways can ask for a lower entry rank, but they take longer overall. When you compare courses, look at the accreditation status and the total time to professional recognition, not just the entry rank — an Engineers Australia accredited degree is what employers and registration bodies look for.
One university works differently from all the rest. The University of Melbourne does not offer an undergraduate engineering degree: you start with a Bachelor of Science, Design or Biomedicine, study an engineering or information technology major from day one, and then progress to a Master of Engineering in your chosen specialisation. Entry to the Master of Mechanical Engineering requires an undergraduate degree with a weighted average mark of at least 65%, plus tertiary-level mathematics and physics, and Melbourne offers Graduate Degree Packages to school leavers that secure a place in the Master of Engineering — the handbook lists an ATAR of at least 93.00 to package the Master of Mechanical Engineering with a Bachelor of Science, Commerce or Design. If Melbourne is your target, your ATAR gets you into the undergraduate degree first, and your university marks decide the engineering step.
Prerequisites matter as much as your rank
Engineering is one of the few fields where your school subjects can matter more than a few ATAR points. Most engineering degrees require mathematics at an advanced level — in Victoria that usually means Mathematical Methods, in New South Wales it usually means Mathematics Advanced or Extension, and other states have their equivalents. Many courses also require or strongly recommend physics or chemistry, and some require English at a particular level. A missing prerequisite can rule you out no matter how high your ATAR is, so check the prerequisites for every course you are interested in before you choose your final school subjects.
If you did not take the required maths, you are not necessarily locked out. Many universities offer bridging courses or foundation programs in mathematics that let you meet the prerequisite after Year 12, and some offer a Bachelor of Engineering with a built-in foundation year. Your subjects also affect your selection rank through adjustment factors: strong results in advanced mathematics and science can add points to your rank at many universities. Our guide on how ATAR scaling works explains why advanced maths and science subjects often scale well.
What else matters for engineering entry besides your ATAR?
Engineering schools select school leavers mainly on rank — there is no admissions test and interviews are uncommon. Your ATAR is not necessarily the number they use, though: adjustment factors can raise your selection rank above it, and in engineering the most relevant ones are strong results in mathematics and science, alongside factors for living regionally or remotely, educational disadvantage, and school schemes such as SEAS in Victoria. Add any adjustments you qualify for to your ATAR and you get your selection rank — and it is that rank, not the raw ATAR, that universities hold up against their cut-offs. Our guide on how ATAR cut-offs work walks through selection ranks and adjustment factors step by step.
Work experience is not an entry requirement, but it matters later. Engineering degrees include practical placements and industry projects — UWA's combined engineering degree, for example, requires at least 450 hours of suitable practical experience — and graduates with placement experience find work faster. When you choose between universities, look at their industry links and placement programs as well as their entry ranks.
Where do I find the ATAR for each engineering course?
Only the official source for the course itself can give you the real figure. Begin with the university's course page, which sets out the entry requirements, prerequisites and Engineers Australia accreditation status for the current intake. Then search for the course on your state admissions centre's site — VTAC in Victoria, UAC in New South Wales and the ACT, QTAC in Queensland, TISC in Western Australia, SATAC in South Australia and the Northern Territory — where you will find the lowest selection rank published for recent intakes, meaning the rank of the last applicant who received an offer.
Handle those figures carefully. The lowest selection rank is not the median and not the rank most students entered with; the last applicant in may have benefited from adjustment factors or a special pathway. The figure also moves from year to year, so use the most recent intake, look at several universities, and treat the numbers as a guide rather than a guarantee. If you are comparing engineering with other competitive degrees, our guides on the ATAR needed for medicine, the ATAR needed for law and psychology take the same approach.
What if my ATAR is below the engineering range?
A rank below the usual engineering range is not the end of the plan. The most common alternative is to start an engineering degree at a university with a lower entry rank, or in a less competitive specialisation, and transfer later on the strength of your university results. Another option is a diploma or pathway program that guarantees entry into the second year of an engineering degree if you meet the required grades — UNSW College's Diploma in Engineering, for example, lists a Gateway adjusted ATAR of 75 for 2027 entry. You can also consider a related degree — such as a Bachelor of Science with a strong maths and physics focus — and then apply for a Master of Professional Engineering, the graduate pathway into the profession. And if your rank is well below the range, read our guide on what to do with a low ATAR — it covers alternative entry pathways that apply to engineering just as they do to other courses.
Two schemes look beyond the ATAR itself. UNSW runs the Faculty of Engineering Admissions Scheme (FEAS), which considers your ATAR alongside your marks in maths and other relevant subjects, and asks for your Year 12 report, a short video and a personal statement. UNSW's Portfolio Entry scheme offers early conditional offers for selected engineering degrees, with an adjusted ATAR entry requirement of up to 10 points below the lowest selection rank for the degree. A TAFE diploma in engineering technology can also earn credit into a Bachelor of Engineering, and later offer rounds sometimes have lower cut-offs where places remain. None of these routes changes the degree at the end — the accreditation is the same.
Is engineering hard to get into in Australia?
At the broad level, engineering is more accessible than its reputation suggests. UWA's published 2026 figures show its Bachelor of Engineering (Honours) admitted students with a lowest selection rank of 80.00, and UWA guarantees entry for most courses when the ATAR requirement is met — so a student with an ATAR in the low 80s and the right prerequisites clears the bar there. The competitive layer is the elite specialisations at the Group of Eight, where UNSW's engineering streams list 2026 lowest selection ranks of 94–95 and combined degrees sit higher still.
What catches most applicants is not the rank but the prerequisites. The maths requirement rules out strong students who never took Methods or Mathematics Advanced, while a student a few points below the published figure who has the prerequisites and qualifies for adjustment factors can still get in. If your ATAR is in the 70s or low 80s, the question to ask first is not "which university will take me" but "do I have the maths, and which adjustment schemes apply to me" — those two answers move the outcome more than a few extra ATAR points.
Should you choose a specialisation by its cut-off?
Choose the specialisation by interest first, then use the ATAR strategically to decide which university and which year of entry. Choosing a specialisation because its cut-off is lower is a path that stops working in the first year — students who enrol in a field because the rank matched, not because they wanted the subject, are the cohort most likely to defer, swap or drop out. The practical order is: identify the field you actually want to work in, find the courses that lead there, rank the universities by where you would want to study and the cut-off you can realistically reach, and build a pathway if your ATAR does not reach the top option directly.
Most students who get into their preferred field do not do it through the highest-ATAR direct route — they do it through a deliberate pathway that uses bonus points, regional entry or an articulating diploma to land the same degree at a sustainable academic load. And once you are in, your ATAR stops mattering: placements, university marks and industry projects decide your graduate prospects, not the rank you entered on. A lower cut-off in a specialisation you do not enjoy is a poor investment of four years; flexible first-year entry lets you choose later, after you have tried the subjects.
Common mistakes
- Trusting a single quoted cut-off. Engineering entry requirements vary widely by university, specialisation and year. Always look up the current figures on the university's course page and your state's admissions centre.
- Missing the maths prerequisite. Most engineering degrees require advanced mathematics. A high ATAR without the required maths will not get you in — check prerequisites before choosing your school subjects.
- Ignoring adjustment factors. Strong results in advanced maths and science can add points to your selection rank. See what adjustment factors apply to you before deciding a course is out of reach.
- Treating the lowest selection rank as the typical entry rank. The lowest figure is the last person in, often with adjustment factors behind them. The median ATAR shows what a typical entrant actually had — at UWA's Bachelor of Engineering (Honours) it was 95.20 in 2026, against a lowest selection rank of 80.00.
- Assuming every specialisation is accredited the same way. Most engineering specialisations are fully accredited by Engineers Australia, but some are still seeking accreditation — UNSW lists biomedical engineering this way. Check the accreditation status of the exact specialisation before you apply.
Sources — check the official tables
VTAC • UAC • QTAC • TISC • SATAC • UWA: Entry standards (2026 ATARs by course) • UWA Handbook: Bachelor of Engineering (Honours) / Bachelor of Science • UNSW: Bachelor of Engineering (Honours) (Mechanical Engineering) • UNSW: Gateway Admission Pathway adjusted ATARs 2026 (PDF) • Melbourne: Engineering courses and pathways • Melbourne Handbook: Master of Mechanical Engineering entry requirements • UNSW: Engineering admission pathways (FEAS)
Related calculators
Estimate your rank with the VCE ATAR Calculator or the HSC ATAR Calculator — or try the main ATAR calculator if you studied in another state. Victorian students can also use the Study Score Calculator to see what their study scores mean for their ATAR. If you are weighing engineering against other tech degrees, see the ATAR needed for computer science. Every calculator result on this site is an ESTIMATE ONLY, so always confirm the entry requirements on the official course page.
Last updated: November 2026.